Pmgr 12v Starter For 2013–2015 Hyundai Santa Fe 3.3l (36100-3c221)

By Author: Amelia
Total Articles: 23
Comment this article

The PMGR 12 Volt Starter is designed for the 2013, 2014, and 2015 Hyundai Santa Fe with the 3.3L engine. This starter uses a 12V electrical system, delivers 1.4 kW of power, rotates clockwise, and features a 12-tooth pinion gear for reliable engine cranking. It replaces Hyundai OEM part number 36100-3C221 and Delco part number 8000470. Before purchasing, always compare your vehicle's engine, existing starter, part number, and specifications to confirm compatibility.

What Does a Starter Do?

The starter motor turns your engine over so it can start. When you turn the key or press the start button, the battery sends electrical power to the starter. The starter then uses this power to engage the engine's flywheel or flexplate and rotate the crankshaft. This allows the engine to begin its combustion cycle. Once the engine starts running on its own, the starter disengages and stops turning. A properly working starter is therefore essential for reliable and consistent engine starting

Signs Your Starter May Be Failing
1. A clicking sound when you try to start the car
2. Slow engine cranking
3. The ...
... car starts only some of the time
4. Nothing happens when you turn the key

What Is a PMGR Starter?

PMGR stands for Permanent Magnet Gear Reduction. This type of starter uses permanent magnets and a gear system to turn the engine with good force. Compared with older direct-drive starters, PMGR starters use less electrical power.

Product Specifications

1. Type: Starter
2. Series: PG260H
3. Design: PMGR
4. Voltage: 12V
5. Power: 1.4 kW
6. Rotation: Clockwise (CW)
7. Pinion teeth: 12
8. Mounting type: Flange
9. Mounting holes: 2

Which Vehicles Does It Fit?

The main application is the Hyundai Santa Fe 3.3L:
1. 2013 Hyundai Santa Fe 3.3L
2. 2014 Hyundai Santa Fe 3.3L
3. 2015 Hyundai Santa Fe 3.3L

The same starter is also listed for other 3.3L vehicles:
1. Hyundai Azera: 2011–2015
2. Kia Cadenza: 2014–2015
3. Kia Sedona: 2016
4. Kia Sorento: 2014–2015

OEM and Cross-Reference Part Numbers

Part numbers are the most reliable way to match a starter. This product replaces:

1. Hyundai: 36100-3C221
2. Kia: 36100-3C221
3. Delco: 8000470

Basic Installation Tips

1. Disconnect the negative battery cable first. This helps prevent accidental electrical shorts.

2. Compare the new starter to the old one. Check the mounting holes, terminals and gear.

3. Clean the connections. Dirty or corroded terminals can cause poor electrical flow.

4. Start the bolts by hand. This avoids cross-threading. Tighten them to the vehicle manufacturer's specs.

5. Secure all wires. A loose connection can cause clicking, slow cranking or no start.

6. Test it. Reconnect the battery and start the engine. It should crank smoothly.

Rule Out Other Problems First

Slow cranking does not always mean a bad starter. Before replacing it, check these:

1. Battery: Is it charged and healthy?
2. Terminals: Are they clean and tight?
3. Cables: Are there any signs of damage?
4. Charging system: Is the alternator keeping the battery charged?

Final Thoughts

If your 2013–2015 Hyundai Santa Fe 3.3L has a failing starter, this PMGR 12V unit is a listed replacement for Hyundai 36100-3C221 and Delco 8000470. Check your year, engine size, part number and mounting details. Rule out battery and cable problems. Then choose the correct starter for your vehicle.

You can view the product and check current availability on the Denparts website: PMGR 12 Volt Starter for 2013–2015 Hyundai Santa Fe 3.3L, 36100-3C221.