Asbestos Management Plan Sydney: A Simple Guide For Property Owners

By Author: Sydney Environmental Group Pty Ltd
Total Articles: 56
Comment this article

Management of land and buildings is not limited to design and useful purpose. Safety issues should be given the same importance when it comes to the protection of people. Sydney city applies two fundamental safety measures that involve an Asbestos Management Plan Sydney and a Phase 1 contamination report. Any person who is a land owner or leaser or is planning to develop land should study both fields of knowledge.

What is an asbestos management plan?

The Asbestos Management Plan Sydney happens to give an accurate description of the whereabouts of the asbestos on the site alongside the way to handle the asbestos safely. Asbestos was a substance that was used in many construction projects that was in existence in the period of old constructions. The substance may be located in building materials consisting of walls and roofs and pipes and floor tiles. It does not become violent until it is touched and it is through human intervention that a person harms or alters it thus releasing its destructive power. The substance emits ...
... minute fibres into the atmosphere that may cause severe health problems to individuals that breathe it.

The plan sets out:

Where asbestos is located

● Its condition
● Risk levels
● Steps to control exposure
● Safe work methods
● Rules for regular checks

This is not a plan that is executed once. It should be updated when some changes occur on site. Take the example, when you intend to do some repairs or demolition, it should be indicated in the plan.

The importance of Asbestos Management Plan in Sydney.

There are numerous older buildings in Sydney. This renders asbestos an issue of common concern. You have to have a plan in place should you be a manager of a commercial property, school or an industrial site.

It helps you:

● Guarantee safety of workers and visitors.
● Meet legal duties
● Avoid costly delays
● Reduce health risks

Even a little work can be unsafe without a plan. Even a basic exercise of drilling in a wall may cause the release of dangerous fibres. Such a risk can be prevented through appropriate measures.

What Does A Phase 1 Contamination Report Entail?

Phase 1 Contamination Report Sydney is the initial step of identifying the potential of land pollution. The preliminary site check is a site pre-assessment. The evaluation review looks at the history of the site and the neighbouring properties. The purpose of the testing program is to detect possible sources of contamination by pre-analysis contamination detection.

This report includes:

● Past land use
● Nearby activities
● Site inspection
● Review of records and maps
● Risk of contamination

At this point no soil or water testing is conducted. It is rather research and observation.

The reason why you need a Phase 1 Contamination Report Sydney.

This is a process through which you can get site risk information. The process assists in ensuring that you will not buy land with contamination issues. The process will enable you to develop development projects that will not bring any safety concerns. The process assists you in planning the projects, which will be in compliance with the requirements of the regulations. In such a case, where the soil was used as a fuel storage area in the past, oil will contaminate the soil. This risk will be detected in the Phase 1 report. The next action will rely on your judgment of proceeding with testing your sample using the high-tech analysis.

Phase 1 After Action Report?

Your project involves the task of risk assessment work as the first step. The second thing to do after the identification of risks is the Phase 2 study that entails testing the soil water and air samples to find the level of contamination. You receive accurate information. You will use this information in determining whether any clean up work should occur or not.

Selecting the Appropriate Consultant.

Not all reports are equal. You require professional trained personnel who are well informed of site conditions and local regulations.

A good consultant will:

● Adhere to the Australian standards.
● Keep language plain and straight forward.
● Provide practical advice
● Deliver reports on time

They are also supposed to instruct you on the further course of action. This assists you in eliminating conjecture.

Common Mistakes to Avoid

A lot of individuals do not report on time. That often leads to problems.

Avoid these mistakes:

● Working without asbestos checks.
● Purchasing land without Phase 1 examination.
● Ignoring old site records
● Using outdated reports

All these may become delays, fines or hazards.

Final Thoughts

Safety planning is a conceptual entity. Asbestos management plan provides protection to people working in buildings against asbestos. The Phase 1 contamination report Sydney will establish the suitability of the land use. The two tasks necessary in this process are not difficult to achieve yet generate great benefits to the project. The three elements offer safeguard of health as they reduce risks and establish more favorable conditions of the project work. This is one of the requirements that owners of property in Sydney should fulfill. The most intelligent decision-making step is to get reports at the best time.