Tv Doesn't Turn On With Remote But Works After Unplugging: Causes And Fixes

By Author: Smita Jain
Total Articles: 128
Comment this article

Quick Checks Before You Unplug Your TV Again

Try the easy stuff before you go reaching for that wall socket. Look at the TV power light. If it is off, make sure the power strip switch is turned on, and the plug is seated securely in the wall. If you have any doubts, try another outlet.
Now consider the remote control. Focus directly on the TV, clear anything out of the way that might be blocking it and ensure no one has enabled child lock or hotel mode in the settings. These features may cover buttons. And remember, for safety reasons, never open the TV case. If none of these simple fixes rectify the situation, it might be something to do with remote settings, or even a problem with TV software, which we look at in the next sections.

Test the Remote and Power Source First

Replace the batteries with a new set or swap them around to make sure they are in place properly. If the contacts appear dirty, clean them with a dry cloth. Step closer to the TV, and try using the power button again. You can also aim the remote at a phone camera and push a button; many cameras display infrared ...
... light as a dim glow.
Next, try wiggling the power cable for the TV. You want to wiggle it back and forth enough to make sure it's not just a loose or dirty plug; there may be some corrosion on the contacts, for example.
Common Causes When the TV Only Starts After Unplugging

If your TV only powers on after you unplug it for a moment, its electronics are probably caught in what we call a half-sleep mode. The TV acts like it's in standby, but refuses to wake up all the way when you come back to it.
The remote is sometimes not set up properly. A smart remote can lose the pairing, and the TV won't acknowledge it until its power is cycled to clear out its memory.
It's also possible to encounter a software defect in standby. The (relatively) miniature computer inside the TV locks up, and when you unplug it, you are basically physically forcing a reboot.
Settings can confuse things, too. Normal startup may be interrupted by HDMI CEC, which allows devices to control each other over HDMI, or eco modes that cut power in order to save energy. Tons of brand-specific reset methods are on YouTube, but videos there can be fast or not stylistically easy to follow, with different menu configurations.

Remote Configuration, Pairing, and Reset Steps

Smart remotes usually require a hard reset. Remove the batteries and next press the Power button on the remote while the batteries are removed. Hold the power button for more than 10-15 seconds. Put the batteries back in and stand near the TV.
Access the TV settings with the panel buttons and then look for a menu indicating remote, pairing, and Bluetooth. Try the pairing or reset option and test again. If these menus seem overwhelming, many a prospective set of cable-snipping malcontents enter the search query Rightcliq TV repair near me home service, and pay a local tech to walk through their setup, but in person.

Software Glitches, Standby Bugs, and Simple Fixes

Software updates can also resolve a lot of strange power issues.
1. On your TV, go to settings > system or support — depending on if you are on a Smart TV or running an operator-tier device — and select software updates.
Experiment with disabling quick start or fast boot features that keep the TV in a somewhat-light sleep state to enable faster turn-on. If you have an option for a soft reset or restart in the menu, run that instead of yanking the plug every time.

When to Call a Technician Instead of Guessing

Some signs say that you should stop testing on your own. If the power light blinks in a certain pattern, the TV instantly makes popping sounds, you smell smoke or burning, or black is on the screen even when you hear sound, call a professional.
Components on the inside, such as the power board or main board, could be dying. An LCD TV repair technician has fabricated tools and safety equipment that most homeowners lack. There are also many who bring stubborn sets to an LCD screen repair shop every time startup problems reappear. A call for this kind of issue could set you back 1000 to 1500, which is cheaper than guessing, only to make the situation worse.

The bottom line:
When your TV is not responding to the remote, go back to basics. Test batteries, power cords and basic settings. Then do remote pairing and software reset steps so that you don't have to unplug the TV every night. The problem is that once warning signs start creeping in or if the fix never lasts, the problem may spiral downhill. Keeping the manual nearby and perhaps keeping a clear YouTube guide for your model as well, in case you need it, may help. And when you're ready to hand it off, just hit up your friendly tv repair service and let them do their thing.
Resources : https://medium.com/@smitajain046/tv-doesnt-turn-on-with-remote-but-works-after-unplugging-causes-and-fixes-80d20403f145