Lid Lock Light Blinking On Your Washer? Causes & Simple Solutions

By Author: Smita Jain
Total Articles: 91
Comment this article

Understanding the Lid Lock Mechanism in Washers

The lid lock system in washing is specially designed to prevent the lid from being opened during the spin cycle. It is prevented from being touched against the skin at high speed during rapid rotation, avoiding injuries.

How Different Washers Engage the Lid Lock

Different washers trip the lock at different points. Here's how it works:
• Some have the lid lock whenever a wash cycle begins.
• Some operate the cap as water is loaded, or the barrel turns.
This variance is based on the different safety protocols built into each machine’s control board.

The Role of the Lock Motor and Lid Striker

The lock motor and lid striker are key operation and safety parts for washing machines. They have two main purposes, to hold the lid or door closed while the washer is in operation and to tell the washing machine control that your door is secured properly so it can wash.

Main Reasons Your Lid Lock Light Keeps Blinking
A flashing lid lock light typically indicates that the washer will not start because ...
... it cannot sense that the lid is properly closed. And here are the common causes of this hindrance in top loading units.
• Lid not closed properly
• Malfunctioning lid lock mechanism
• An Unbalanced load
• Loose or damaged wiring
• Faulty lid switch
• Control board problem
• Power supply issues
You can try and fix the easy problem first before having to call a washing machine repair technician professional.

Simple issues you can check in minutes
Start with the lid. Verify it's completely closed and not off kilter on the hinges. Inspect the rim for any little clothes, string, or material stuck in between the lid and the tub blocking it.
Make sure the washer is not just paused as a blinking light can mean the cycle is in progress and waiting for you to press start again.
If the power went out, then that might cause a glitch in the control. Touch cancel then unplug the washer to reset the lid lock mechanism.
The time it’s is actually a lid lock switch or wiring issue

With usage, the physical lock can wear out, particularly on an older machine, or one where the lid gets slammed shut. Splashes from moisture or detergent seep into the lock and control area, causing sticky switches or weak connections.
In that circumstance, even if you feel the lid click shut, the control board might think it’s open. More thorough inspections of the switch, wiring and circuit board poke into live parts so that job is best left to a pro that has great experience.
Quick Fixes You Can Try Before Calling a Technician
There are a few easy things to try at home before you pick up the phone. These are OK for the most of us and you don’t need any special tools.
Step-by-step: reset and basic checks
• Click the cancel button to break the cycle.
• Disconnect washer power for a couple of minutes to allow reset.
• Just plug back in the power and then close it tightly.
• Inspect the vicinity of the lid and clear any trapped article.
• Write down any error codes displayed, and then proceed.
Do not try to open the lid when still being locked. If it does not unlock after a reset, do not force it and go to professional assistance.

Warning signs it's time to quit and seek professional help

If you notice a smell of burning, see sparks or the breaker continues to trip then turn the washing machine off and unplug it immediately. Another red flag is a loud or fast clicking of the lock (or if a light keeps blinking after you’ve done all those simple checks).
At this point, take a phone call and say hello! Rightcliq Washing machine repair service, are you there?
A professional will open up the panels safely, trace the wiring and control board, and correct the fault before it does damage to your motor or lock, all at a fraction of the cost later.
How to Prevent Future Lid Lock Light Problems
The best way to keep your lid lock in good working condition and help extend the life of your washer is to maintain it.
Simple care tips to protect your lid lock

Don't drop or slam the lid closed; shut it lightly. Do not stuff the drum, because a heavy load can stress the hinges and lock. After washing day, wipe off any water and detergent spills there near the lock area.
Take a break the washer needs to cool down in the time between back-to-back heavy loads. Read your user manual, apply the cleaning methods recommended by your manufacturer and you'll often circumvent a washing machine lid lock problem in advance.

Conclusion

A flashing lid lock light often indicates a minor problem, rather than a major failure. Just a couple quick checks and a simple reset fix the washer lid lock flashing problem 90% of the time. If it remains lit or there are other warning signs, ask for a technician covering Rightcliq washing machine repair near me to come and diagnose the problem. Tackling the easy problems upfront saves big trouble later. A little basic home maintenance along with prompt, expert assistance can help you maintain your washer, and your health, for a long time to come and produce cleaner laundry
Resources : https://medium.com/@smitajain046/lid-lock-light-blinking-on-your-washer-causes-simple-solutions-04b4980404ab.