How To Replace A Cooler Cover Assy – 6 Plt In Backhoe Loaders

By Author: Seetech Parts
Total Articles: 171
Comment this article

Cooler Cover Assy 6 PLT is an important component that forms part of the backhoe loader cooling system. It shields the radiator, keeps the airflow direction, and prevents debris from being present in the cooling premises. With time, this cover may be damaged as a result of vibration, impact, or wear-out, which will interfere with the cooling effectiveness, and overheating may result.

This manual will take you through the procedure of changing the Cooler Cover Assy -6 PLT safely in the backhoe loaders .

Why the Cooler Cover Assy – 6 PLT Matters

The airflow is crucial to the cooling system of a backhoe loader. The cooler cover:

Protects the radiator and its ability to cool.
Directs the air by the cooling fins.
Dust, stones, and debris are not allowed to get in.
Assists with the best engine temperature.
Covers delicate cooling elements.

A torn or lost cover may also lead to overheating, increased fuel consumption, and poor engine performance.

Signs You Need to Replace the Cooler Cover

Consider Replacement of the Cooler Cover Assy- 6 PLT in case you have ...
... noticed the following:

Mounting points broken or cracked.
Loose or missing bolts
Too much vibration when in operation.
Apparent damage or crushing.
The accumulated dust as a result of poor sealing.
Tools You’ll Need

To do this replacement, you will need to prepare:

Socket set or spanner set
Screwdriver
New Cooler Cover Assy 6 PLT (OEM) recommended.
Clean cloth
Anti-rust spray (optional)
Step-by-Step Guide to Replace a Cooler Cover Assy – 6 PLT
1. Park the Machine Safely
Park on a level surface
Switch off the engine
Apply the parking brake
Let the cooling system and engine cool.

First, Safety first - working on hot parts may be hazardous.

2. Open the Engine Compartment

Find the area of the cooler assembly. Unscrew the back or side case (depending on the type of machine) to obtain the cooler cover.

3. Inspect the Current Cover

Before removal, check:

Mounting bolts
Seal condition
Alignment of the cover

This can be used to determine whether there are other related parts to be attended to.

4. Remove Mounting Bolts

All the bolts that hold the cover of the cooler are to be loosened and removed using the right socket or spanner. Store them out of harm out of reach, should they be reusable.

5. Detach the Old Cooler Cover

The cooler cover should be carefully removed from the mounting frame. In case it is lodged by dirt or rust, then carefully use a flat screwdriver.

6. Clean the Mounting Area

Clean dirt, rust, or debris off the mounting surface. The new cover can be made to fit when it is well cleaned.

(Optional: Spray around the mounting area with anti-rust.)

7. Install the New Cooler Cover Assy – 6 PLT
Make the new cover correspond with the holes.
To prevent cross-threading, insert bolts manually.
Tighten up with a spanner or socket.
Make sure that it is firmly placed without any gaps.

A tight fit is necessary to allow free breathing.

8. Close Engine Compartment and Test
Close all access panels
Start the engine
Allow the machine to rest a couple of minutes.
Check vibration/loose fitting.

Check the temperature indicator - correct cooling should be regained.

Tips for Longer Cooler Cover Lifespan
Do not hit on the narrow or rocky places.
Wash the cover frequently to avoid clogging.
Check mounting is done during scheduled service.
The Cooler cover Assy – 6 PLT must be of OEM quality to ensure long life.
Conclusion

A Cooler cover Assy - 6 PLT replacement is not a complicated process, which will allow you to keep your cooling effective and safe against overheating your engine in a backhoe loader. The right procedure will result in a safe installation and good functionality of the machine.