How To Extend The Life Of A Backhoe Loader Battery 12v 110

By Author: Seetech Parts
Total Articles: 149
Comment this article

The battery 12V 110 is the center of the electrical system of any backhoe loader, as it performs the duty of supplying power to the ignition, up to the lights, and control modules. Still, even important, the battery is a component that is overlooked the most frequently. The appropriate care and maintenance can greatly increase your backhoe loader battery's 12V 110 life, and thus will start smoothly and provide the same starting power even when the working conditions are challenging.

1. Regularly Inspect and Clean Battery Terminals

One of the most prevalent battery failure causes is corrosion. With time, the accumulation of dirt and acid around the terminals decreases the conductivity. Periodically clean the terminals with a wire brush and smear them with petroleum jelly or terminal grease to prevent the future occurrence of corrosion.

2. Check the Electrolyte Level (for Non-Sealed Batteries)

When your 12V 110 battery is not maintenance-free, then regularly inspect the amount of electrolyte. The low fluid levels will lead to the drying of internal plates, thereby lowering the capacity of the battery. ...
... It should only be refilled with distilled water to maintain the right level.

3. Keep the Battery Fully Charged

The use of the alternator in short bursts or intermittently may not enable it to charge the battery completely. A good battery charger/maintainer should be used in the off times to hold the charge at the best possible levels. Deep discharges should be avoided and will lead to a short battery life.

4. Secure the Battery Properly

Battery connections may be loosened or internal plates damaged by vibration due to rough terrain or heavy work. Always make sure that the battery is properly mounted and ensure that terminal connections are tight.

5. Inspect the Charging System

A loose belt or a failed alternator may cause overcharge or undercharge of the battery. Check voltage output regularly - when the engine is running, the voltage should be between 13.8V-14.4V. Overcharging may result in electrolyte loss and overheating.

6. Protect Against Extreme Temperatures

Elevated temperatures hasten the chemical reactions within the battery, leading to untimely aging. Extreme cold, on the other hand, can lower cranking power. When space is available, park your backhoe loader in shaded or sheltered places and have insulated covers where possible.

Conclusion

Backhoe loader battery 12V 110 that is well maintained guarantees dependability of starting a backhoe, stable electrical operation, and low working site downtime. Through such maintenance discipline as frequent inspection, cleaning, charging appropriately, and guarding against various extremities, you will be able to increase the battery life and optimize the use of your machine. Time spent on correct battery maintenance now will pay off in the costly replacement and missed time on the job tomorrow.