Ultimate Guide To Hydraulic Breakers Of Backhoe Loaders

By Author: Seetech Parts
Total Articles: 171
Comment this article

One of the most vital and effective attachments that a backhoe loader may have is a hydraulic breaker (hydraulic hammer). As they are engineered to deal with concrete, asphalt, and rocks, they offer the complete capabilities of your machine as well as far beyond digging.

Here is the final guide to hydraulic breakers of backhoe loaders, and here we discuss how they work, the benefits of hydraulic breakers, the selection of the right breaker, and how to maintain them to perform for a long time.

1. What Is a Hydraulic Breaker?
A hydraulic breaker is a percussion hammer driven by a hydraulic system. It is mounted on the arm or boom of the backhoe loader, and it delivers blows of high impact to crush hard materials.

Functions due to the hydraulic pressure of the pump on the backhoe
Turns hydraulic energy into impact force
Widely applied in demolition, roadway works, quarrying, and trench work
2. Key Benefits of Using a Hydraulic Breaker
With a hydraulic breaker as an addition to your backhoe loader, it becomes very valuable:

Versatility: Best suited to demolition, rock breaking, ...
... and foundation work
Increased Productivity: An increase in speed compared with manual or traditional techniques
Efficiency on Costs: Minimizes the requirement for additional machines in the location
Compact power: Incredible in tight locations where big machinery cannot be used
3. Types of Hydraulic Breakers for Backhoe Loaders
There are several differences between the hydraulic breakers, such as

Light-Duty Breakers: The best breakers to use in small-scale demolition/breaking sidewalks
Medium-Duty Breakers: Suitable for trenching, road repair, and general use
Heavy-Duty Breakers: These are used in the rock excavation process and concrete footings.
Hint: Hydraulic capacity of your backhoe loader (flow and pressure) should always be matched with the size of the breaker used.

4. How to Choose the Right Hydraulic Breaker
When you choose a hydraulic breaker to install in your backhoe loader, take into consideration:

Carrier compatibilities (machine weight, hydraulic flow, pressure)
working conditions (type of soil, hardness of materials)
Impact energy and frequency needed
Tool type: Moil point, chisel, or blunt tools to do certain tasks
Look up sizing charts and required flows in the user manual of your backhoe or in the supplier of your attachment.

5. Maintenance Tips for Hydraulic Breakers
With the correct care, life is longer and safer, and efficient operation is provided.

Daily inspection: Check for loose bolts, wear, oil leaks, wear or oil leaks
Greasing: Tool bushings should be lubricated after every 23 hours.
Hydraulic Oil Quality: Qualified fluid by the manufacturer and clean
Tool Wear Monitoring: Change moil points or chisels when worn.
Storage: When not used, store in a clean, dry place upright.
The failure to maintain the breakers may hurt the attachment and the hydraulic system of the backhoe.

Conclusion
This final piece of advice about hydraulic breakers of backhoe loaders gives reasons why one should have this type of attachment which is tough and has high-impact types of jobs. Proper selection and use of the breaker, along with thorough maintenance, can go a long way in enhancing efficiency at the job site and tool life as well as productivity.