How To Fix Canon Printer Errors? (easy Guide)

By Author: theodore carter
Total Articles: 15
Comment this article

In this article, we have mentioned all the aspects you need to know about the common Canon printer errors and how to address these errors in the most prominent way.

Learn “how to fix Canon Printer Error 5B00 waste Ink Error” will guide you in Step-by-step Process follow our given steps for solving your Issue.

Canon Printer Errors #1: 5B00: Waste Ink Absorber Full

Causes

The first and most common error most people face when it comes to the Canon printer is Error 5B00. This error means that the waste ink absorber in your Canon printer is full. The waste ink absorber in the Canon printer is helpful in collecting excess ink, which is flushed through the printer due to many tasks, such as maintenance tasks, cleaning the print head, and so on. 

How to Fix?

The first thing you can do to fix this error is to turn off the printer.

After turning it off, make sure to access the waste ink absorber. You will find the waste ink absorber inside the printer, near the ink cartridges. After accessing it, make sure to clean it properly with a clean and damp cloth.

Make sure to reset ...
... the printer’s waste ink counter by:

Press the Resume button for at least 5 seconds, release and turn the printer on. Afterward, turn the printer off and on until the error 5B00 gets improved or cleared. 

In this way, Canon printer Error 5B00 can be easily corrected.

Learn “how to fix Canon 6000 Printer error” this error shows when the Paper jam issue comes for solving the issue easily follow the given guide.

Canon Printer Errors #2: 6000: Paper Jam

Causes

The other most common error faced by many people is Error 6000. It is the most common error in which the paper jams inside the ink cartridges of the printer. Due to this error, some papers get stuck in the printer’s internal system. You must follow the steps mentioned below to fix this error. If, after following the below-mentioned steps, this error persists, then you must contact the Canon support team.

How to Fix?

The first step to fixing it is to make sure to turn off the printer.

After turning the printer off, check for the paper tray to see if there is any jammed paper or not. If the jammed paper is there, then you must remove it in a very careful manner.

Also, check the printer cover and the rear panel to see if there is any paper stuck inside it.

After thoroughly checking for the jammed paper, reconnect your printer with the computer device and restart it.

Learn “how to Solve 5200 Ink Cartridge Error” this occurs due to Cartridge Issue do it by our easy process resolve your canon ink cartridge issue.

Canon Printer Errors #3: 5200: Ink Cartridge Error

Causes

Moving on further, the other most common error that is faced by many people is Error 5200. This error is basically the type of ink cartridge error. This type of error occurs due to issues with the printer’s ink cartridges. Some of the major issues that people face due to this error are improper installation, an incompatible cartridge, or low ink levels.

How to Fix?

The first thing you can do to fix this error is to check the ink cartridges. Checking the ink cartridges is crucial as it will ensure that the ink cartridges are installed in the correct manner.

Afterward, check the ink levels in the ink cartridges. Also, check if you are using Canon-approved ink cartridges, as the other types of ink cartridges may cause issues with the Canon printer, such as non-OEM cartridges. However, it is advised to use only those ink cartridges that are approved by Canon.

You will see that your Error 5200 has easily resolved after thoroughly replacing or adjusting the cartridges and restarting the printer.

Canon Printer Errors #4: B200: Print Head Error

Causes:

The other most common error faced by many people regarding the Canon Printer is the B200 error. This is basically a print head error. This type of error usually occurs when the printer cannot recognize or communicate with the print head. This could be due to a misalignment, an obstruction, or a faulty print head.

How to Fix It:

The first thing you can do to fix this error is to turn off the printer and remove the ink cartridges. While removing the cartridges, carefully check the print head for any visible obstructions, such as ink residue or debris. Afterward, clean the print head gently with a soft cloth and distilled water or rubbing alcohol and restart it. You will be able to get rid of print head errors in the most prominent way.

Visit: ij start canon

Source: https://ijstartcanen.com/how-to-fix-canon-printer-errors-easy-guide/