How To Setup Canon Pixma Ip 2770 Inkjet Printer: Full Guide

By Author: theodore carter
Total Articles: 15
Comment this article

Nowadays, printers are a necessity in workplaces. Almost all workplaces adopt Canon printers as a prominent device for printing important files and documents. However, people may not know the procedure to setup a printer. In this guide, I’ll walk you through the complete steps on how to setup Canon PIXMA IP 2770 inkjet printer. Let’s get ready to setup your printer and start printing your documents.

Before that, you must learn a little about Canon printers. Many have adopted these heavy-duty printing machines. As a printer expert, I have used a Canon PIXMA IP 2770 model for my regular printing work. And I was really happy with the results. Therefore, if you’re someone who wants to setup their printer, it’s pretty easy to do. I’m mentioning the basic steps here.

How to Setup Canon PIXMA IP 2770 Inkjet Printer?

Setting up a printer seems a difficult task, but actually it’s not. You only have to go through a few steps to completely setup your printer on a device and connect it to a Wi-Fi or USB connection. Let’s explore the steps here.

Step 1: Unboxing and Preparing Your Printer

First ...
... and foremost, you need to unbox your printer and remove all its packaging and adhesive coverings. Moreover, you need to ensure that no materials are stuck inside your printer. Also, check if the printer’s box contains a user manual.

In order to prepare your printer, you need to:

Plug your printer into a power socket.

Then, load the papers inside the paper tray.

Now, turn on your printing device.

Step 2: Setup Cartridges and Select the Language

In this step, you must insert the printer cartridges and pick a language to use on your printer. Look at the steps for this.

First of all, insert the cartridges into the space and load the sheets in the paper tray.

Then, your paper will be all ready to print.

After that, you will have to turn on your printer.

When you’re asked to select a language, select your preferred language.

You know ‘how to setup Canon PIXMA IP 2770 inkjet printer‘. All the users must note that most printers need cartridge setup.

Step 3: Adjust Your Grids and Scanner

In this step, you must adjust the grids on your printer. In other words, you will command your printer to print in the position it should be. This setting helps you reset the grids if you’re not satisfied with the prints.

In order to adjust the scanner, you must place the printer board circuits on the scanner to adjust it, and then run the scanning.

Step 4: Download and Install Printer Drivers

Printer drivers are the important software that should be installed on your device. This software helps your printer to print seamlessly and effectively. Check the steps below to install drivers.

In the first step, you must visit the Canon’s official website.

Then, head over to the Software & Drivers section.

After that, search for your printer name, such as Canon PIXMA IP 2770, in the search bar.

When you see your printer, select it.

Also, choose your operating system from the given list.

Moving forward, you’ll get a long list of available printer drivers.

Next, you need to pick the suitable printer drivers for your printer.

When you select the printer drivers for your printer, hit the Download button.

By default, your printer drivers will be saved under the Downloads folder.

Now, locate the Downloads folder and double-click on the printer drivers file to open it.

Then, let the installation run for drivers.

Finally, you have the printer driver software.

That’s how you can simply install the necessary drivers for your printer.

How to Connect Canon PIXMA Printer to a Device?

A printer connection to a device is a very important concept when it comes to printer setup. You need to decide which connection you want to prefer for your printer. Whether a wired or wireless connection, you can select anyone.

Method 1: Using a USB Cable

If you prefer a wired connection, use the USB cable for connecting your printer to a device. Use these steps.

You need to connect each end of the USB cable to both devices.

Also, confirm that your printer is connected to the power outlet.

Then, turn on your printer.

Install the necessary printer driver software.

Method 2: With a Wi-Fi Network

If you want to connect your printer to a device via Wi-Fi, follow these steps:

Go to your printer, open the Settings option, and then hit Device Settings.

Now, finally, click on the Wireless LAN Settings.

After that, choose the Default settings/Setup without cable.

Then, choose your network’s name or SSID.

Next, type your Wi-Fi password and hit OK.

Finally, you know ‘how to setup Canon PIXMA IP 2770 inkjet printer‘ and how to connect a printer to your device. You can start your printing journey happily now.

Frequently Asked Questions (FAQs)

How to Setup My Canon Printer on a Mac?

You can select a Bluetooth connection option to setup your devices:

Initially, go to the Apple menu on your Mac device.

Then, select the System Preferences and click on Software Update.

Now, prepare your printer and turn on your printer.

After that, go to the Apple menu and choose the System Preferences option.

Next, hit the Printers & Scanners option.

Moving forward, hit the Add option and choose the Default option.

Also, click on your printer’s name from the available list.

Finally, your printer is setup on a Mac system.

How Do I Connect Canon Printer to Windows via Bluetooth?

Below are the steps to connect a printer to a Windows computer via Bluetooth:

In the first step, turn on the Bluetooth on your computer.

Then, hit the Add Bluetooth or other device button.

After that, choose the Bluetooth option as the device type.

Now, let your devices pair with each other.

Next, head over to the Device Manager option and verify the COM port.

At last, get the necessary printer drivers.

How Do I Connect My Canon Printer to My Laptop via Bluetooth?

To connect your printer to your laptop via Bluetooth, use these steps:

In the first step, launch the Control Panel on your laptop.

Then, head over to the Printers and Devices and then Bluetooth Devices.

Now, switch on your printer.

After that, tick the box for “My device is setup and ready to be found.”

Finally, click on the Next button to finish the process.

Visit: ij.start.canon

ij start canon

Source: https://ijstartcanen.com/how-to-setup-canon-pixma-ip-2770-inkjet-printer-full-guide/