Why Your Geyser May Not Be Heating Water Right

By Author: Smita Jain
Total Articles: 110
Comment this article

In this blog, we can discuss some common causes for a geyser non heating and practical ways of rectifying them.

1. Faulty Heating Element

The core component inside a geyser tank that generates warmth from electricity is known as the heating element. Its constant usage in heating water day after day inevitably causes some degree of wear and tear over an extended timeframe. Eventually, this can lead to insufficient heating or even a total lack of heating altogether.

Remedy:

Replace a broken heating element. This procedure is best inspection by a geyser repair technician to do it correctly and safely.

2. Thermostat Problems
The thermostat controls the internal temperature of the water in the geyser. A malfunctioning thermostat can create overheating, or just fails to produce heat at all.

How to fix:
Check with a professional the thermostat. In some instances, recalibrating or even replacing the thermostat would solve the issue.

3. Sediment Build-Up

Meanwhile, dissolved minerals contained ...
... in the water, after residing in the storage container for numerous years, will precipitate out of the solution. This accumulated sediment acts as an isolating barrier obstructing the transfer of heat from the element to the liquid above. As a result, the geyser's functionality becomes gets affected due to its inability to sufficiently elevate the water's temperature.

Solution:

Using a drain valve, flush out sediments in your geyser tank. You can avoid this issue by regular maintenance of the geyser and flushing it once or twice a year.

4. Power Supply Problems

Disruption in a power supply can be one of the reasons for an improper functioning geyser. This may involve a burnt fuse, a tripped circuit breaker, or bad wiring.

Solution:

Check the circuit breaker and ensure the power supply is stable. If the issue persists, consult an electrician to inspect the wiring and connections.

5. Pressure Valve Malfunction

A pressure relief valve is a safe feature in your geyser, which regulates the pressure that should be within the water tank. Such a fault in the valve can influence how the heating procedure will run and thus damage your geyser due to its failure.

Solution:

Replace the faulty valve with the help of a professional plumber or technician.

6. Faulty Geyser Timer or Switch

If your geyser is equipped with a timer or switch to control its operation, any faults in these components can disrupt the heating process.

Solution:

Check the timer or switch for faulty parts. If faulty, replace with new parts.

Signs of Poor Installation or Maintenance:

Engage a professional technician to inspect your geyser installation and carry out routine maintenance. Servicing your geyser correctly will extend its life and keep it performing at its best.

Check Your Geyser: Look physically for damage, leakage, or wear and tear.
Annual Servicing: Service your geyser every year. This is a guarantee that all parts are in good working condition.
Temperature Setup: Do not set the thermostat to unnecessarily high temperatures. That does not only wear out the heating element but also goes to waste for no reason.
Minor Repairs: Keep problems minor by addressing the smaller issues before they begin getting out of hand.

Conclusion
It is a very frustrating scenario if a geyser not heating up water correctly, but common causes can lead to corrective actions within no time. It can be due to faulty heating elements, sediment, or even some problems with the supply of power; this will sort out the situation within no time, saving the trouble of replacement or geyser repair costs. Rightclicq provides geyser repair services for all brands in Bangalore at your doorstep within your budget.

Resource: https://medium.com/@smitajain046/geyser-repair-servicewhy-your-geyser-may-not-be-heating-water-right-d72f74c52401