How To Deal With Cracks In Your Concrete In Three Simple Steps?

By Author: Michael Gilmore
Total Articles: 289
Comment this article

Cracks in concrete is inevitable. No matter whatever you do you cannot prevent them, at the most you can delay the onset of the cracks but never stop them from appearing. Thankfully, it is possible to fix the cracks in the concrete. There are many easy and inexpensive ways that you can try to mend the cracks. When you invest time and effort behind the repair and maintenance of the concrete, you are going to increase the lifespan of the surface. With the right set of tools, you can make the surafce stand the test of time. Today, we are going to discuss some ways in which you can deal with cracks for good. Repairing a crumbling concrete requires a different method. But as far as preventing water from entering the small cracks or not allowing the weeds to come through the crack is concerened, you can follow the procedures discussed here.
 
How to Repair Concrete Cracks?
Before you repair the concrete crack, you need to follow the below steps:
 

Clean the Concrete: It is important that you prepare the surface before you get started with the repair work. If ...
... you don’t do the basic steps then the cracks can appear again and you will have to go through the entire process again. Don’t try to jump this step. It is important that you clean the concrete by getting rid of any brittle or dislodged part. You can use a hammer or a chisel to get the job done. Use a pressure washer to remove any dirt or loose material that has accumulated over the concrete. Once the area is clean you can proceed with the next step.

Caulk or Mortar: Make sure that the crack and the surrounding area is completely dry before you begin with the caulking. Fill the crack with the mortar and spread it in a proper manner. Repeat this process till every crack in the concrete is filled. There should be no crack left. In case the crack is bigger, you can use a mortar mix with caulk and then spread it over the crack for better coverage. Scrape away any excess amount for a smooth and clean finish.

Now Wait: The trick lies in waiting for the caulk or mortar spread to dry completely before you can call it a day. Depending on the weather, the mixture will take time to dry. If the temperature is hot and humid then the spread willd ry up within two or three days. However, if the weather is wet, it can take a week to dry properly. Do not rush this process. Let the mixture dry on its own so that the crack is filled properly and does not reappear easily.

 
How to Repair Cracks in Driveways?
If your driveway is full of cracks then the above steps will not be sufficient to deal with the problem. However, at the same time, it does not mean that you need to break down the entire driveway and get a new one built in its place. Resurfacing the concrete is enough to fix cracks that are bigger in shape and size.
 
How to Repair Cracks in Floors?
Many people have concrete floors in their homes and offices because of its durable nature and modern and attractive appeal. With the passage of time, cracks tend to appear in these slabs as well. All you need to do is follow the above mentioned steps to deal with the cracks. However, there are few things that you need to keep in mind - one is that you have to ensure that the application process of the mortar mixture is done carefully and that once the application is complete, you should take special care to smoothen it out. The mixture should blend in as seamlessly as possible. Cracks are natural, how you camaflouge them makes all the difference.
 
How to Repair Cracks in Patios?
Although patios are not as exposed as your driveways, the wear and tear part is also different. But that does not mean that cracks don’t appear. It is essential that you deal with the hairline cracks as soon as you notice them. Don’t let dirt or debris settle in the cracks or don’t let weeds to bceome an issue. By following the above mentioned steps you will be able to deal with the cracks.
 
Don’t Let Cracks Bog You Down:
Cracks are very common in concrete slabs. They tend to appear with the passage of time. No matter how well you take care of the slabs, you cannot prevet the cracks from appearing. Most of us don’t have the necessary tools and equipments to fix the cracks. If you believe in DIY solutions then you can always purcahse the required tools in order to fix the cracks. Or if you are like us, who prefer to hire experts for commercial concreting Port Lincoln then it is best to hire a professional.
 
Find out who are the leading service providers in this domain. Get in touch with several of them to find out who is saying what. Make sure that you hire the best in the business.
 
About the Author: This contribution has been made by Michael Gilmore who has written a number of articles on Commercial Concreting Port Lincoln and provides fruitful information.