Noise Control In Adjoined Spaces, Generally In Shared Retail Or Commercial Spaces

By Author: Kevin Richard
Total Articles: 249
Comment this article

The factors for Minneapolis noise control we will address are the wall noise and ceiling. First of all, I have to assume that most of the noise comes from somewhere. Drop ceilings are notorious for permitting noise to travel.
They have open space that carries vibrations conveniently across the open areas above them. It is needless to say that the grid that connects to all the walls and suspension ties that connect the ceiling to the most frequently steel rafter ceiling. All these materials permit for a noise to travel along, both the construction materials and the open space.
Wall solutions
For walls, there are two treatment methods. Each can be used individually or together. The first is a choice if renovation or new construction is in progress. The controlling noise barrier can be installed in studs, underneath the sheetrock and is highly efficient in preventing noise in its tracks from travelling through the walls. This can also be affixed to the current sheetrock and another layer of sheet rock installed ...
... over it sandwiching the material.
The second choice is the wall panels. When affixed to the walls, the noise source side they will absorb loud noises softening the noise hitting the walls, hence, reducing the noise travelling through the walls. The panels will also soften and reduce the noise level in the room that the noise originated from.
The best way is to apply it on both the sides. Controlling noise barrier between the walls is apparently on a shared wall and just required in one of the rooms. Nonetheless, using the vinyl sound barrier in a double studded situation with space between the walls strikingly increases STC ratings. As for the ceiling treatments, if it is done on the noise source side, you will have better results as it is having the noise. But application on both sides will just better the results. For instance, using better acoustic tiles on the noise source side and utilizing ceiling tile barriers laid on top of the serene side would be perfect. Laying ceiling tile barriers on both sides of the ceiling would just reduce noise further.
Therefore, for the best results, both sides can benefit from the treatments above. Usually, the side originating the noise will benefit more from the absorption materials as they will lessen the noise waves hitting the materials and the walls that travel into the serene space.
Packless Silencers
Designed to offer solutions for applications for St. Paul noise control solutions where fibrous acoustic material is not allowed in the airstream, and packless silencers offer the attenuation without the use of acoustic media. These silencers are generally used in vital ambience and laboratory applications.
Rectangular silencers are available with different baffle geometrics optimized for various velocities and performance options.