Constructing A Soundproof Home Recording Studio

By Author: Henry Janice
Total Articles: 154
Comment this article

While constructing a home recording studio, it is vital to soundproof it, not only for better acoustics within the recording studio and to prevent noise from entering, but also to safeguard the rest of the house from the noise from within the studio.

There are different approaches when it comes to soundproofing a studio, including usage of heavier materials to block the noises, building methods and devices that are designed to assist in lessening structural vibrations and using materials that are designed to assist in absorbing sound, such as the sound absorbing wall strips. Sound absorption not only assists to isolate the sound within the room and offers protection from external noise, but it also assists to enhance the sound quality in the room due to the fact that echo and sound vibrations are better controlled.

Soundproofing new construction from environmental noise

If you are constructing a recording studio as a new construction, you will have the best chances to add soundproofing. Rather than wall construction where there is a single set of sill plates and studs to which the drywall is installed on ...
... both the sides, the best wall construction for soundproofing is to build a double wall, with two sets of studs and sill plates. The same principle should be followed during the floor and ceiling construction.

Soundproofing existing construction

In most cases, home recording studios are constructed in existing spaces, without the luxury of being able to build the construction of the room to be used, ensuring not to choose a room that is adjacent to a specifically noisy room or one which is exposed to much exterior noise. One simple way to assist soundproof a room is to go around the whole room and pay special attention to any tiny cracks or holes, like those under the doors, or even openings and small cracks like switches and electrical outlets. You can tighten up these areas by using standard sound absorbing wall strips .

There are also products like rubber isolation mounts specifically designed for soundproofing that can be used in areas like under doors. If there is a window in the room, you may want to consider if you actually have to continue using the window, as glass is not very good in blocking sound.

Sealing the window with sound cancelling foam and covering the glass with soundproofing materials, then covering the whole window with a plywood piece or heavy drapes is frequently the best approach for a window. Vents and air ducts should be fitted with sound baffles so that air can pass through but sound is lessened. Walls can be reinforced with a secondary layer of gypsum board, along with a soundproofing material between the new board and the current wall. There are also rubber feet that you can get for furniture and tools that will assist to lessen vibration and sound through the floor.