Consider All The Aspects Before You Decide To Replace Or Go For Hot Water Systems Repair!

By Author: Dean Rossiter
Total Articles: 32
Comment this article

When your hot water system breaks – you need to take a call – do you want to get the system repaired and fixed or do you want to get it replaced and install a new one in its place? It might be a difficult question to answer, but it is important that you ask this question. Generally, a hot water system lasts for 10 to 15 years. However, the longevity also depends on the quality of installation, the water quality, the location of the unit and the maintenance regime that you followed.
 
If your existing water heater system is quite old and it is leaking for quite sometime now, it is better to get it replaced with a new one. You may troubleshoot the current issues with water system repairing but it will solve the problems on a temporary basis. In the long run the problem will not cease to exist.
 
Should You Replace or Opt for Hot Water Systems Repair Brisbane?
The easiest way to take the call is by analysing the cost-benefit ratio. Follow the 50% rule. As per the rule if the repairing cost is equal to 50% of the cost of the new water heater system, ...
... you should better replace the system then get it repaired. In case, the repairing cost is less than 50% of the new device cost, don’t forget to calculate the frequency of repairing involved and the existing condition of the water heater system.
 
When to Replace the Water Heater System?
With the passage of time, the minerals present in the water tend to react with the steel inside the water heater system and corrode the water heater in the process. When there is a leak, water heater repair is not a viable option. In comparison to the old water heater systems, the new ones are more energy efficient. They are less prone to corrosion. When you upgrade to a new system, you have the opportunity to install a better one, which also cuts down the repairing cost. Why don’t you check out solar water heaters, heat punk and the tankless variety? They offer better savings option as well.
 
Water heaters are the third largest energy user in the house, so you need to be very careful about the variety and type that you install.
 
When to Repair the Water Heater System?
The best way to increase the longevity of your water heater system is by opting for hot water systems repair Brisbane and maintenance services at frequent intervals. You can hire the services of a professional company in order to get the needful done. When you opt for regular maintenance services, you are not allowing the sediments in the water to settle down and cause corrosion of the metal. You should get the pressure valve checked and fixed from time to time as well. And don’t forget to lower the temperature setting of the thermostat. Ideally, it should be 120 degrees Fahrenheit. When the temperature setting is correct, there is no chance of the overheating the water heater system.
 
Some Common Signs You Should Not Ignore
If you are not sure whether the hot water system is malfunctioning or not, you should look out for the following signs:
 

The valve is not working.
It is taking more time to heat the water.
The water has a musty and pungent smell.
The water coming out of the hot water system is muddy and diluted.
The thermostat temperature is set incorrectly.
There is a continuous leak from the system.
The water has a weird taste.

 
If you are experiencing one or more of these sings, you can be rest assured that something is seriously wrong with the hot water system. Get in touch with the professional and ask him to inspect the system thoroughly. Pay attention to their findings and accordingly you can take the decision as to what needs to be done.
 
Summing it Up
Most of us use the water heater system on a daily basis. If proper care is not taken you will not be able to enjoy a hot shower after a hectic day. During winters, you will find it difficult to shower because hot water is not coming out of the system. Even when it is, the entire process is taking way longer than it should.
 
Depending on the situation of the system, you should take the call whether to replace or hot water systems repair Brisbane. Whatever you do, you should get it done quickly. Delaying it will not serve any purpose. Make sure that you hire the services of a reliable plumber. If the professional is not skilled he will not be able to carry out the required repairing work proficiently. And in case, you are replacing the existing hot water system with a new one, a novice plumber will not be able to install the system correctly. Proper installation is a must if you want the device to function properly. Find out who is the leading plumber in your area and get in touch with him at the earliest.
 
About the Author: This contribution has been made by Dean Rossiter who has written a number of articles on hot water systems repair Brisbane and provides fruitful information.