How Much Do Permeable Pavers Cost?

By Author: Pavers Experts
Total Articles: 31
Comment this article

Installation costs for permeable pavers range from $20 to $40 per square foot. On average, a previous concrete driveway for two cars costs $5,600 to $10,200, or $14 to $26 per square foot. It costs $15 to $23 per square foot to install a porous asphalt driveway for two cars, which costs an average of $5,000 to $8,500.

Permeable Pavement Cost Comparison
Pavement type Average cost per square foot
Permeable stone pavers $20 – $40
Pervious concrete $10 – $20
Porous asphalt $10 – $23
Concrete grass grid $8 – $22
Plastic grass grid $9 – $18

Contact Us

Total Installation Cost
Water can pass through rip rap, pervious pavements, and porous pavements.

1. Porous often describes asphalt with voids inside with good drainage.
2. Permeable often describes paver stones with gravel in between and a low-drainage rate.
3. Water quickly drains from concrete and gravel grids, referred to as pervious surfaces.

Permeable ...
... Pavers Cost
Permeable pavers cost $20 to $40 per square foot installed, depending on the type and design complexity. Gravel fills the joints in permeability concrete paving blocks, so water can filter through. Permeable paver installation includes an aggregate base for water infiltration.

The following table is an average cost to install a permeable paver driveway.

Average Permeable Pavers Cost

National average cost $10,400
Minimum cost $2,400
Maximum cost $35,000
Average range $5,000 to $27,000

Best Type of Permeable Paver
The best type of permeable paver depends on a few things. In the case of previous pavement or concrete, you might be more willing to pay these materials’ previous driveway costs or previous paving costs. If porous asphalt is more your thing, then the permeable asphalt driveway cost will be worth it for you. Just know that there will be cracks and maintenance shortly.

If you like gravel or grass look without the headaches and want the best material possible, permeable plastic pavers from Pavers Experts are the best choice.

They have their own aesthetic appeal and charm thanks to the sleek, clean-cut look of the pavers combined with one or more types of gravel, and they perform better in every category.

A permeable paver driveway from Pavers Experts can be installed in as little as one day and will be completed much faster than a concrete or asphalt driveway. When it comes to permeability, Pavers Experts stands above the rest.

Pavers Experts company pavers are 100% permeable and able to handle even the heaviest of rainstorms with ease. Compared to interlocking concrete pavers, brick pavers, and/or permeable stone pavement, Paver Experts pavers are far more permeable.

Contact Us

Comparing Costs of Permeable Pavers
Factoring in installation costs, a porous asphalt driveway cost about $14 – $23 per square foot. It costs between $16 and $26 per square foot to install a pervious concrete driveway. Permeable interlocking concrete pavers cost about $6 – $14 per square foot, and the permeable concrete block paving cost is identical to that. Concrete pavers are considered permeable concrete, while solid concrete with hollow spaces is considered pervious concrete. According to the permeable pavement cost comparison, natural stone pavers cost between $20 and $40 per square foot more than any other material. When it comes to grass pavers like the true grid root system, the permeable pavement cost is about $6 – $12 per square foot.

Permeable Paver Maintenance Cost
Permeable Paver’s maintenance costs $2.25 to $2.50 per square foot on average for pressure washing with vacuum-sweeping service. Homeowners can also rent pressure washers at $60 to $150 daily from hardware stores.

Permeable Pavers require regular maintenance and cleaning to prevent clogging and increase longevity.

1. Vacuum or sweep every three months.
2. It is important to replace damaged pavers as soon as possible.
3. Keep gaps free of dirt & debris.
4. Refill spaces with gravel as required.
5. Replace gravel when fully clogged or uncleanable

Permeable Paver – Pricing and Installation Cost Checklist
1. The price of Permeable Pavers can vary greatly depending on the company you choose – every company has its own overheads and operating expenses.
2. Installing a Permeable Paver isn’t an easy task to perform and can leave you with a sore back. If you want the work completed by a masonry or landscaping company, it may be more cost-effective to hire them.
3. Landscaping or, mason companies will most always get better prices on Permeable Paver — saving you back and additional costs of Permeable Paver, so shop around and ask your neighbors if they can recommend someone.
4. Try to get costs in late Fall, or early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Budget an additional 7-15% over what our calculator indicates for Permeable Pavers.
5. Visit every supply house that sells your particular brand of Permeable Paver and try to negotiate a better price with each supplier – I save on average 20%.

Click Here to More Information