Patio Hardscape Design And Installation Made Simple

By Author: Garden Imprint
Total Articles: 1
Comment this article

Do you want to do some hardscaping in your own backyard? To build a simple stone patio, follow these eight simple steps.

• Use pegs and ropes to mark the deck area.

• 6-inch decking To avoid flooding, dig a deck with a slight slope (about 14 inch per square foot).

• When you're satisfied with the base, firmly press it into the soil until it's flat.

• Use landscaping fabric to aid drainage and keep weeds at bay between the rocks.

• Add 2-inch gravel to the base and push it into place. Push down again with another 2 inches of gravel.

• Cover the compressed gravel with a screed of 5 cm thick sand. Press again after flattening the sand.

• Place the patio stone carefully on the compressed board.

• Polymer sand should be used to fill the four seams. When wet, the sand acts as a mortar, helping to keep the stone in place. It also inhibits the growth of weeds and repels water.

Are you looking for complete landscape services in Massachusetts? Garden Imprint is a leading garden maintenance company that provides the best native garden landscape designs, hardscape design and installation, and a variety of other services at competitive prices. https://www.gardenimprint.com/