Safety Guidelines For Handling Calibration Gas

By Author: Belinda Rahme Barakat
Total Articles: 52
Comment this article

Calibration gas is a gas that is used to calibrate gas detectors. It is also used to check the accuracy of gas meters. The calibration gas Australia is mixed with a known concentration of the target gas or vapour. The mixture is then used to test the gas detector's accuracy. There are many different types of calibration gases, and the most common ones are nitrogen dioxide, carbon monoxide, and methane.

While there are few dangers in handling calibration gas, for the most part, there are times when something bad can happen, for example, when canisters are being moved. That's why we compiled a list of safety precautions for handling specialty gas for you.

Ensure the Gas is Stored in the Right Cylinder

Store calibration gas in the appropriate cylinder. This type of cylinder must undergo the patented cylinder seasoning procedure to ensure calibration gas has a longer shelf life than usual. In order to reduce the waste created by empty cylinders, some calibration gas suppliers have partnered with the EcoSmart cylinder program. The program allows for cylinders that are no longer being used as calibration gas ...
... containers to be recycled into new ones.

Transport the Gas Cylinders Properly

When you carry calibration gas, it is important to be mindful of how you transport the cylinders. Here are a few tips:

- Always use a carrier designed for calibration gas cylinders. This will ensure that the cylinder is properly secured and won't fall over or roll around during transport.

- If you're transporting more than one cylinder, make sure they are all securely fastened to the carrier.

- It is also a good idea to mark each of the cylinders with their contents and date, so there's no confusion about what type of gas is inside.

Ensure Proper Storage of Calibration Gas Cylinders

Calibration gas cylinders must be stored properly to ensure the safety of your employees and customers. Storing them properly will ensure that they last longer and remain effective. Here are a few tips for storing your calibration gas cylinders.

- Place calibration gas cylinders on metal shelves at least four inches off the ground and away from sunlight or water sources.

- Store calibrated gases in their original containers with protective caps on top of their valves.

- Label each container with its date of expiration so you'll know when to replace it.

- Keep them in a cool, dry place out of direct sunlight.

- Make sure they are secured so they cannot fall over and break.

- Inspect them regularly for leaks or damage.

- Dispose of them properly when they are no longer needed.

Pay Attention While Opening the Calibration Gas Cylinder

It's always best to be safe when handling potentially dangerous materials, and that's why you should take care when opening a calibration gas cylinder.

- Inspect the container for leaks and damage before taking it out of storage.

- Connect safety devices such as hose couplings, regulators, valves, hoses and pressure gauges securely to their fittings.

- If you notice any discolouration or smell on the outside of the cylinder or inside the valve before opening, don't try to take off that part; replace it instead.