Tungsten Disulfide Powder - Superior Lubricant For Moving Metal Components

By Author: snehaldesai
Total Articles: 97
Comment this article

Opt for Tungsten Disulfide Powder which provides quality lubrication for expensive machinery, thereby enabling them to perform in difficult environments without succumbing to wear out and expensive repairs.



Tungsten Disulfide Powder is a solid lubricant that is used in situations where oil cannot be used. It works well in environments that have high vacuum, pressure and load. This lubricant is most suitable for use with semiconductor materials. If you are seeking a dry lubricant that offers maximum lubrication, Tungsten Disulfide also known as WS2 is what you require. Its lubricity cannot be matched by any other substance, even MoS, also known as Molybdenum Disulfide else Graphite. Here is a look at the key qualities of this lubricant:

• Temperature resistance in normal air – between -270º C to 650º C

• Temperature resistance in vaccum – between -188º C to 1316º C

• Load bearing capacity - 300,000 psi

What Are The Special Qualities Of Tungsten Disulfide Powder?

When it is ...
... used on moving parts, they will get coated with it, which reduces friction, enhances their load bearing capacity for bigger cycles. It can also be sprayed onto surfaces of machine components. Such a spray can be applied at normal room temperature at a distance of 12 inches from the surface of the component and the spray does not need any binder to adhere to the surface. Some examples of components to which it can be applied are:

• Cutting tools

• Shafts

• Valve components

• Pistons

• Chains

• Mold Release

• Blades

It is to be noted that amongst other lubricants it stands out because it is a super lubricant as it has zero friction. It is basically a two dimensional material but one that has the ability to interact with electromagnetic light. It has electronic properties that enable it to engage with a wide range of spectrum here. It can be used as an additive in vehicle oil and also high performance grease.



When it is used as a lubricant in machinery parts it will not only enhance their performance but prevent them from breaking down which causes expensive repair work. The machinery will function normally even when used extensively, thus enabling operations to continue, so production flow is normal which results in desired profits for the month. The usual fretting, friction and galling that occurs between parts made from dissimilar metals and hardness in a machinery is eliminated, through its lubricant qualities. It is also much more effective in preventing carbon build-up than Teflon, moly and graphite.



Author Bio – snehaldesai is a mechanical engineer who writes articles which are very informative and helpful. He has written here tips about looking for high quality dry lubricants like Tungsten Disulfide Powder.