Faq From Clients That Buy Timber Pelletizer Machine

By Author: Richi Machinery
Total Articles: 241
Comment this article

( 1) How to make the mold and mildew life longer?

With the continual introduction of wood pelletizer machine
right into the market, the advancement of mechanical tools is additionally continuously transforming. The damage of the mold during the production of wood pellets is likewise a major expense. So, exactly how to maintain it straight influences the life span of the timber pellet making maker. Therefore, it additionally directly affects the processing price of wood pellets. How to make the mold and mildew life of the timber pelletizer maker device longer? Get your response today!

① Regularly clean oil as well as fill

If the timber pelletizer maker is not utilized for a month, it is suggested to clean up the oil inside, so the oil will slowly harden throughout lasting storage space, which will certainly make it hard to remove the following time it is utilized, which will seriously influence the subsequent use the mold and mildew of wood pelletizer equipment.

After ...
... the pellets are refined, it is needed to utilize oil to grind for a time period to guarantee that all the oil continues to be in the die opening, which is of wonderful benefit to the work the next day as well as is also for the long-term use the die. The oil can be mixed with waste engine oil and also timber chips. It can be made as soon as as well as can be recycled.

② No need to clean the mold for a long period of time

If the mold and mildew as well as pinch rollers are no more made use of for a long period of time, it is recommended to remove the mold after cleansing as well as storage space. The master cleans up the sawdust pellets inside the mould and complies with the mould surface. This way, on the one hand, we can stop the enterprise from being hard to get rid of the pellets due to the solidifying of the pellets as a result of the lasting storage of the students. On the other hand, since the sawdust has water absorption, if the sawdust externally is not removed, it might accelerate the growth of the corrosion of the mold and mildew surface area.

Related post:Wood Pellet Plant

③ The mold need to be saved in a dry and aerated area

Most of the molds of the wood pelletizer machine are made from alloy steel. If they remain in a humid location for a very long time, the surface of the mold might be harmed due to air corrosion, hence greatly lowering its service life.

④ The dealing with process should beware

The mold and mildew of the timber pelletizer machine is a high-precision component, and the mold hole is meticulously refined according to the compression proportion of the mold and mildew. If you are careless throughout the handling process, the framework of the internal wall of the mold opening is damaged, which may bring about molding throughout handling. reduced rate as well as short life span.

The above are the ideas on how to make the mold and mildew life much longer for wood pelletizer device Adhere to these 5 approaches to keep the mold and mildew, as well as I think your mold and mildew will certainly last much longer.

Related post:Germany 2-2.5T/H Wood Pellet Plant

( 2) Why do the pellets produced by the timber pellets maker have a poor appearance?

Why do the pellets produced by the timber pellet mill maker look bad? Today we will discover why. During the manufacturing of timber pellet gas by the timber pellet manufacturing device, there will certainly be a circumstance where the pellets contain powder as well as have a harsh surface area. Currently, it is also essential to examine the equipment data settings of the timber pelletizer machine. Besides, what is the factor for this sensation?

Timber pellets cause even more wood pellet powders, this feedstock can be brought on by low dampness material, the wetness content of wood pellet device feed is usually between 12% and ~ 15%. After adjusting the wetness content of the raw product, the problem still exists, that is, the pressure roller die is seriously used. When the internal surface of the ring die of the timber pelletizer equipment is significantly used or the bit size requires to be changed, it requires to be replaced. The surface area of the sawdust pellets is rough, which might be triggered by the excessive dampness material of the raw product, or the preliminary use the mold. This issue can be addressed by readjusting the moisture material of the raw product, or by repeatedly grinding the mold and mildew with the material.

To summarize, the reasons why the pellets created by the timber pelletizing maker are bad in look are stated today. I hope it will certainly aid you when you utilize the wood pellet device once again. Over the years, Richi Equipment has actually focused on the r & d and manufacturing of timber pelletizer equipment machines, biomass pellet makers, sawdust pellet makers, fuel pellet makers, wood processing tools, drying devices, cooling down tools as well as product packaging equipment.

( 3) Advised timber pellet device.

There are numerous timber pellet mill equipment on the marketplace. Today, Richi Machinery will certainly advise some of them:

① The initial kind of little wood pelletizer maker
It is a new kind of biomass power machinery separately created by our business's technological team as well as has independent intellectual property civil liberties. The timber pelletizer machine is basic in structure, simple to run, stable in operation, as well as can function continually. The pressed pellets have the advantages of high density, high burning worth, low wetness and reduced ash material. The timber pellet machine equipment transmission takes on high-precision gear transmission, 4 collections of gears are connected, and also the hydraulic oil shipment system can automatically circulate oil between the transmission and the main shaft bearing. The life span of the primary shaft and gearbox gears.

Related post: RICHI pelletizer machine

The working parts of the timber pelletizer maker die plate, pressure roller) are made of alloy steel, as well as the solidity after heat therapy can reach more than 50, which makes certain the constant operation of the device and lengthens the service life of the whole wood pelletizer device The digital control system of the main engine adopts the global typical configuration of star-delta starting, as well as the procedure is incredibly secure.

② The 2nd kind of small wood pelletizer device.

Mainly ideal for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds and other plant stalks and also factory wastes. It appropriates for reduced temperature level granulation of biological microbial fertilizer, organic fertilizer and also substance plant food.

More details: https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html

Attributes of this timber pelletizer device:

① The stress rollers are uniformly dispersed, as well as the operation is secure. At the same time, journalism location is boosted, and also the production performance is enhanced.

② The screw center pressure managing structure is embraced, and the wood pelletizer maker mold void can be big or tiny, which is suitable for various materials to ensure the important impact.

③ This design is equipped with Φ6-Φ10mm size molds, which are suitable for granulation of various products as well as accomplish the best advantage.

For more details: Richi Machinery
Email Address: enquiry@pellet-richi.com
Phone/Whatsapp: 0086-13838389622

RICHI Machinery is a industrial group mainly specialized in the feed pellet machinery , and also covers some other strategic businesses such as biomass pellet energy machinery, organic fertilizer pellet machinery, parts and components and so on. https://www.pellet-richi.com https://www.pellet-richi.com/feed-pellet-machine/animal-feed-pellet-machine.html https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html