Common Reasons For A Toilet That Won't Flush

By Author: Becky Joseph
Total Articles: 49
Comment this article

Is your toilet clogged and won’t flush? Even if it just barely flushes, it can be frustrating. Fortunately, there are several common reasons why your toilet won’t flush and you can easily fix them yourself with the right tools. However, it’s advisable to call in a professional plumber Pickering to get it fixed as you risk damaging the toilet if you attempt to fix on your own. This guide explains the five most common reasons why your toilet won’t flush, as well as how to troubleshoot each one so you can get your bathroom back to normal in no time!

The Handle is Faulty

A toilet handle won’t flush the toiletif it is faulty. Check to make sure it isn’t broken, and that you don’t have any water left in the tank. If not, you will need to call a plumber to either repair the defectivehandle or replace it completely. In an emergency, you could try using plumbing tape on your handle, but if you can’t find any then please call an emergency plumber Pickering immediately.

The Float Ball Fails to Activate

When you flush your toilet, your toilet’s flapper—or its float ball—should rise and ...
... allow water to enter into your bowl. If it doesn’t, there is likely something blocking its way. If nothing enters, even when flushing repeatedly, it means that water isn’t entering your bowl and you may have to call in a plumber. This is often due to old pipes or sediment build-up inside of them.

The Overflow Pipe Is Blocked

The tube carrying water from your toilet tank to your bowl may be blocked or crimped, which can cause it to back up into your toilet tank. Remove the overflow pipe cap and look into it; if you see water, try flushing again. If you don’t see water, there’s probably something lodged in there that’s blocking it up. You should be able to remove any blockage with a snake or wire hanger.

A Piece of Debris is Stuck in the Pipes

If your toilet won’t flush, there could be any number of reasons why. The most common is probably a piece of debris stuck in your pipes. The first step is to plunge it out or snake it out with an auger. If you can’t do either, you might have to call a plumber Pickering.

The Toilet Bowl Water Level Is Too Low or High

If your toilet won’t flush and it appears that there is water in the bowl, check to see if there’s enough water. The best way to do that is by using a plunger. If you need to add water, fill up your tank and then wait about ten minutes. After you wait, plunge again. If you still need to add more water, repeat until your toilet flushes easily.

Toilet repair can be overwhelming. However, most of the plumbing problems can be prevented if regularly maintained and inspected by a professional. Make it a practice to schedule regular plumbing inspection.

Saving Plumbing is one of the leading plumbing companies specializing in offering 24/7 emergency plumbing services for residential and commercial clients. As a licensed plumbing company, we not only fix your leaking pipes but also clean clogged drains.