Engraving Materials Manufacturer And Supplier

By Author: Signvec Pte Ltd
Total Articles: 61
Comment this article

Signvec manufactures engraving materials, which you can get in a variety of colors, thicknesses and finishing options, which you can find to test the color of the engravings when using engraving equipment. There are a number of approaches you can take and the three most popular coloring methods for using engraving equipments are oxidizing, paint stick and paint filling. Oxidizing uses a mild acid to blacken the engraving performed on brass or aluminum.

Since the oxidizing is not selected on where it works on the engraving equipment, it can be used only on metals that already have some kind of coating which is already removed through the engraving process. Brass has a lacquer coating or a similar finish and the aluminum is usually coated with lacquer or it can be anodized. Remove that end with engraving tools such as a diamond graver, burning or rotary cutter so that the exposed areas can be blackened with the antioxidant solution without affecting the rest of the plate.

Oxidizing substance is best applied with the cotton swabs as opposed to a dauber and always remember to keep the engraver free from oil or fingerprints. ...
... Apply the oxidizer as soon as the engraving process is complete so the full effect of the oxidation can be applied to the process. Paint Stick - Applying a color to the work of engraving equipment can be done only on rotary engraved plates which have sufficient depth.

This is usually done using paint through a paint stick that looks like a large crayon and they come in a variety of colors and are easy to use. You just start by shaving the end of the paint stick to remove the skin on it, then rub the stick across the engraving as if using the crayon until all the letters are filled, wipe off the excess paint with a paper towel as well.

Both alcohol and paint thinner work well in removing any excess film that does not wipe away easily, but you will find it much easier to let the paint dry overnight and later wash it with warm water. Paint sticks are convenient and durable, but they don't have smooth gloss that you'll get from actual paint. Provides excellent options for colorizing the work of engraving equipment when it comes to paint filling materials, colors and applications.

Metals and rigid plastics generally work best with fast-drying, oil based enamel with mineral spirits for cleaning. Soft plastics and other materials may be damaged by caustic solvents, but latex or acrylic paints work best with alcohol or water used for cleanup. Aside from the paint, you will also need a brush, an old phone book or newspaper and stiff pieces of tough paper closer to the size and weight of your average business card.

Always make sure that the engraving is smooth, burr free and have enough depth in holding the paint. When using engraving equipment, you will need colorful options. The exact method depends on the material and depth of the paint. Coloring gives the engraver more to work during the creation of an attractive sign with eye catching lettering and it is always best to have options.

To Learn About More Details Engraving Material Kindly Checkout Our Site Today...!

Signvec Technology was established in 1997 and has to-date made a name for ourselves in the engraving and signage industry. We specialised in laser and rotary engraving, cutting and marking machines.