123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Home-and-Garden >> View Article

Fire Remediation Services – Everything You Need To Know

Profile Picture
By Author: Bryson Kaleb
Total Articles: 194
Comment this article
Facebook ShareTwitter ShareGoogle+ ShareTwitter Share

Fires are an insidious, devastating occupational hazard. whether it be propane, gas, electrical, or grease, they can bankrupt any company. The most important thing is to manage things correctly after the event. Proper procedure for post fire remediation is a make or break for your business and reputation. If something goes wrong in a one in a million scenario, don't let yourself go under due to mistakes in the aftermath.

The reasons why there are rules

When a building is poorly maintained, things can go up in flames in a matter of minutes. Aging electrical breakers can lead to short circuiting and cause fires. Grease traps that have not been discharged, or kitchen hoods that have not been cleaned, can turn a fast food joint into a death trap. The NFPA (National Fire Prevention Association) sets codes, standards and methods for fire prevention involving just about everything. Sadly, the realities of shoestring budgets have meant that these things are not always enforced. Sometimes the right combination of profit motive and neglect can leave one's operation vulnerable. There are lots of good service providers out ...
... there that can save the situation from being totally disastrous.

A scenario

Suppose you have a nasty grease fire that began under the hood and it spread to the floor and roof via the grease trap and hood ducts. The cooktop up is completely charred to nothing, leaving a trail of blackness along the tiled wall and up into the ducts above. Because the ducts were leaky before the fire, this left deposits of grease on the roof. They also caught fire, and destroyed most of the roofing. There were flames that charred the floor tiles, right where the grease trap intake lines descend. What a mess. What to do now?

You will need someone who can sandblast the floor tiles and replace what cannot be scrubbed away. Sodablasting is the best method for most other things, like dishes or metallic surfaces. An electrician will be needed to redo any damaged breakers, wiring and fixtures. An HVAC technician will likely have to service the moving parts (i.e. blower motors, heat sensors) and replace ductwork. Someone with an ozone machine will likely have to deal with the lingering odors too.

All of this must happen in addition to the roof reconstruction. When deciding who to use for this, the best would be an outfit that can take away all of the damaged goods (i.e. torched wiring, liquified florescent tubes and melted heating elements) away with the bad roofing. Nobody wants to deal with any more parties than needed, especially when lawyers get involved.

Look for a company that can take care of the issue through prevention, maintenance, and any unfortunate aftermath if a fire does occur.

Alliance-Enviro.com is an environmental company that specializes in services such as mold remediation, asbestos abatement, demolition, dryer duct cleaning, HVAC duct cleaning, attic insulation removal, lead paint removal, bed bug removal, trauma clean up, suicide cleanup, crime scene cleanup, fire damage remediation (alliance-enviro.com/services/demolition/site-clearing/), virus disinfection and sanitizing services, etc. in Los Angeles, Orange County, Riverside, San Bernardino, Sacramento, San Diego, San Luis Obispo, Ventura, and Santa Barbara. For more information, visit https://info.alliance-enviro.com/blog.

Total Views: 728Word Count: 526See All articles From Author

Add Comment

Home and Garden Articles

1. A Complete Guide On Building Repair Services
Author: Christian Zox

2. Indoor Vs. Outdoor Mold Spore Comparisons: What Mold Inspectors Evaluate
Author: BayAreaMoldPros

3. Why Waterproofing Is Necessary- An Overview
Author: Christian Zox

4. What Credentials Should A Professional Mold Inspector Have? Certified Mold Inspector Vs. Licensed Contractor
Author: BayAreaMoldPros

5. Thermal Imaging For Mold Inspection: What Infrared Cameras Can—and Cannot—detect
Author: BayAreaMoldPros

6. Mold Testing Limitations: What A Laboratory Report Cannot Tell You
Author: BayAreaMoldPros

7. Crawlspace Mold Inspection: Moisture, Ventilation And Structural Risk Factors
Author: BayAreaMoldPros

8. What Your Peeling Paint Is Trying To Tell You?
Author: Jake Deering

9. Attic Mold Inspection: Condensation, Roof Leaks And Poor Ventilation
Author: BayAreaMoldPros

10. Bathroom Mold Inspection: Distinguishing Surface Mold From A Moisture Problem
Author: BayAreaMoldPros

11. Mold Growth Behind Cabinets, Baseboards And Wall Cavities: What Inspectors Look For
Author: BayAreaMoldPros

12. Why Is Choosing Strata Painters A Good Idea?
Author: Jake Deering

13. Advanced Mold Testing Explained: Ermi, Mycotoxins, Dna & Traditional Testing
Author: BayAreaMoldPros

14. Hepa Vs. Standard Air Filters For Mold: How Hepa Air Purifiers Capture Mold Spores
Author: BayAreaMoldPros

15. How To Read A Mold Test Report: Understanding Mold Species, Spore Counts & Aspergillus/penicillium
Author: BayAreaMoldPros

Login To Account
Login Email:
Password:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: