123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Home-and-Garden >> View Article

Mold Removal 101: What To Look For And How To Protect Your Family

Profile Picture
By Author: Vince Bucciachio
Total Articles: 20
Comment this article
Facebook ShareTwitter ShareGoogle+ ShareTwitter Share

Any home can become infested with mold, but certain factors make your house more susceptible to mold formation. Mold removal can cost you plenty of money and time, so knowing what to look for and how to protect your family will save you plenty in the long run. Here’s a basic guide on what to look for, how to prevent mold growth, and when to call the pros when it comes to mold removal in Mississauga.

Understanding Mold

Mold is a fungus that grows when moisture levels in a home are too high. Mold can grow in many places, including inside homes on any surface that stays damp for several days or more. Common areas where mold tends to grow include wet basements and crawl spaces, showers, floors of rooms with humidifiers, behind bathtubs or under leaky sinks. In addition, most homes have mold growing behind wallboards or wood paneling. The mold spores travel through air currents until they find a moist place to land, which becomes its new home. Mold thrives during warm months but will continue to grow during cold months as long as it remains damp.

As Part of an Overall Mold Remediation Plan in Your House, Here’s ...
... What You Should Do:

Mold growth often occurs around water leaks from broken pipes and damaged roof shingles due to high winds or storms. Mold can be deadly, especially if you suffer from allergies or asthma. If you notice mold growth in your house, call a professional company that offers mold remediation in Mississauga right away before it spreads further in your home or worsens the health conditions you already have.

Removing Molds from Home

Whether you have mold in a corner of your attic or are dealing with a full-on infestation, it is important to address it as soon as possible with attic mold removal in Mississauga. There are two primary types of mold that can appear in your home: Stachybotrys and Aspergillus. They both produce mycotoxins—toxic substances that can cause flu-like symptoms, respiratory irritation and even respiratory diseases like asthma. The biggest difference between these molds is their appearance; Stachybotrys manifests as black mold while Aspergillus appears as greenish brown.

How to Protect Yourself from Mold

Most mold do not need to be treated with anti-fungal products. It is a natural part of our environment. As long as there is no moisture, then you do not have a problem. If there is mold in your home, you must locate its source. In order to prevent mold from growing back after it has been removed, you must eliminate whatever caused it in the first place. The most common causes of mold growth are water damage or leaks and high humidity conditions. Always check for mold at areas where moisture may collect, such as near leaky pipes, under sinks and dishwashers, in showers and tubs, around air conditioning units or heating systems. Do not try to remove mold yourself unless you know what kind it is! Call professionals if needed before removing mold.

Total Views: 578Word Count: 497See All articles From Author

Add Comment

Home and Garden Articles

1. A Complete Guide On Building Repair Services
Author: Christian Zox

2. Indoor Vs. Outdoor Mold Spore Comparisons: What Mold Inspectors Evaluate
Author: BayAreaMoldPros

3. Why Waterproofing Is Necessary- An Overview
Author: Christian Zox

4. What Credentials Should A Professional Mold Inspector Have? Certified Mold Inspector Vs. Licensed Contractor
Author: BayAreaMoldPros

5. Thermal Imaging For Mold Inspection: What Infrared Cameras Can—and Cannot—detect
Author: BayAreaMoldPros

6. Mold Testing Limitations: What A Laboratory Report Cannot Tell You
Author: BayAreaMoldPros

7. Crawlspace Mold Inspection: Moisture, Ventilation And Structural Risk Factors
Author: BayAreaMoldPros

8. What Your Peeling Paint Is Trying To Tell You?
Author: Jake Deering

9. Attic Mold Inspection: Condensation, Roof Leaks And Poor Ventilation
Author: BayAreaMoldPros

10. Bathroom Mold Inspection: Distinguishing Surface Mold From A Moisture Problem
Author: BayAreaMoldPros

11. Mold Growth Behind Cabinets, Baseboards And Wall Cavities: What Inspectors Look For
Author: BayAreaMoldPros

12. Why Is Choosing Strata Painters A Good Idea?
Author: Jake Deering

13. Advanced Mold Testing Explained: Ermi, Mycotoxins, Dna & Traditional Testing
Author: BayAreaMoldPros

14. Hepa Vs. Standard Air Filters For Mold: How Hepa Air Purifiers Capture Mold Spores
Author: BayAreaMoldPros

15. How To Read A Mold Test Report: Understanding Mold Species, Spore Counts & Aspergillus/penicillium
Author: BayAreaMoldPros

Login To Account
Login Email:
Password:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: