When Should Roof Edge Protection Be Provided

By Author: shahid hussain
Total Articles: 52
Comment this article

Working at a height always has a greater danger of a fall mishap. Roof edge protection is available in a variety of shapes and sizes. Some roof edge protection alternatives clearly outperform others depending on the application, roof design, and project time management. The most efficient strategy to safeguard workers from falling is, of course, to eliminate the need to work at heights; unfortunately, for a variety of (some obvious) reasons, this solution may not be practicable. The risk of a fall must be reduced by implementing control measures, typically in the form of fall arrest or restraint devices such as an edge protection system and interim edge protection. Don't put a premium on safety — in the end, choosing an ineffective roof protection solution puts everything in danger. And having it also guarantees that you remain in compliance with site safety requirements.

Roof edge protection requires for many buildings, Single-Width Aluminum Scaffolding in UAE, and operations, whether for rooftop maintenance, inspection, plant access, or work at height, in compliance with laws, statutory requirements, and health and ...
... safety guidance. If you're not sure where to begin, why not familiarize yourself with the 'Working at Height Hierarchy of Control'?

The first rule is to attempt to avoid working at heights entirely. Of course, this is not always practicable, which is why communal protection is proposed as the next sort of remedy. Guardrails and handrails are commonly used to prevent personnel from falling over the side of a structure, resulting in injury or death. While not all buildings can accept this solution, it is one of the safest and most cost-effective systems to have put on your roof.

What is Roof Edge Protection?

When working at heights is unavoidable, scaffolding solutions provide a barrier that prevents people, equipment, or materials from coming dangerously close to or going off the edge. A proper roof edge system will keep everyone on your roof safe, whether they are visitors, maintenance crews, or employees. A communal system will also eliminate the human error aspect that is frequently attributed- to the user. It implies that the user will not have to worry about wearing a harness or connecting to a personal protection system; all they will have to focus on is the task at hand.

A roof edge protection structure or enclosure is created to prevent falls and injury from heights. It is built around the perimeter of a roof to prevent the possibility of persons or items falling over the edge. This solution typically consists of Guardrails and Handrails and can be used in various settings, including rooftops, train station platforms, football stadiums, warehouses, and chemical industries.

When should you Install a Roof Edge Protection System?

Because it entails working at a height, any work on a roof or Straight Aluminum Ladder in UAE is hazardous. If you are going to begin a residential or commercial construction project, you must reduce the possibility of accidents by installing the proper edge protection device. Whether the project is long or short term, all roof work must be done with the dangers and precautions covered by protective measures. When it cannot be avoided, roof edge protection is the only way to ensure safeguards are in place to prevent falls over the side of the building. The height at which roof edge protection is required is not a numerical value. Roof edge safety is needed whenever there is roof work or access since rooftops are elevated above ground level and falls from them, can cause death or catastrophic injuries.

How Frequently Should Edge Protection Testing Be Performed for Compliance?

The Working at Height industry recommends that Guardrail and Handrail systems used for Work at Height be examined at least every 12 months, depending on the frequency of use. Weather conditions can have a significant impact on the stability of safety edge protection- when exposed to excessively high winds and snow, rails can move and become detached at fixture points – it is therefore critical to visually inspect the system regularly to detect any abnormalities. Get Compliance Testing and Maintenance for this solution to ensure the safety and security of your Guardrails and Handrails.

WHAT TO WATCH OUT FOR?

• A shift away from the original fixing positions
• Critical component and balancing weight damage
• Parts that are loose or missing, such as fastening bolts and screws
• Vandalism
• Rust
• Normal deterioration

Law on Working at Heights-

Before accessing any roof 2 meters above ground level or with a slope more than 26°, the Work Health and Safety Act of 2011 requires the installation of edge protection or a fall arrest system by the employee in charge of safety.

Before beginning this type of height or Heavy-Duty Platform Aluminum Ladder in UAE work, the person handling the business or endeavor must ensure:

• Fall prevention controls (e.g., edge protection or a travel restraint system) are in place to prevent a person from falling any distance or when this is impractical;
• Fall arrest controls arrest a person's fall (e.g., fall arrest harness or catch platform) and prevents or reduces a person's risk of death or injury when the fall is arrested.

The Author is an associate editor for Single width Aluminum Scaffolding in UAE . Single width Aluminum Scaffolding UAE, Scaffolding Single width tower manufacture and supplier UAE, Dubai, Sharjah, Ajman Straight Aluminum Ladder in UAE . We are the leading ladder supplier in UAE. Buy straight aluminum ladder in UAE, Dubai, Sharjah, Ajman, Fujairah.