A Complete Guide On Bespoke Fire Doors And The Importance Of Having Them Correctly Installed By An Accredited Fire Door Installer

By Author: AJM Fire Safety
Total Articles: 14
Comment this article

Large buildings are typically divided into different compartments to prevent fires from spreading from one area to another. To allow the normal flow of human traffic around the building, these compartments are usually joined by fire doors. In a fire, fire doors serve two key functions: when opened, they give a route of escape and while closed, they provide a barrier to prevent the spread of fire.
A well-designed fire door that is constructed of good and strong timber (in combination with other materials) will effectively slow the spread of smoke and flames, without impeding the passage of people. Every fire door must consequently, to varying degrees, operate as a barrier to the passage of fire and smoke, depending on its position inside the building and the fire hazards connected with that facility. In countries like the UK, the most common types of fire doors are FD30 (which provides half an hour of protection) and FD60 (which provides up to an hour of fire protection).
Fire doors can also be made to measure for odd door sizes. These are also referred to as bespoke fire doors and are available in a variety of finishes ...
... to match your interior. Bespoke fire doors, when correctly installed, provide adequate fire protection and added safety when needed most – in case of a fire breakout.
Therefore, if you are having a difficult time finding the right size fire door/s you need, you can have them custom-made to your exact dimensions and requirements. Some manufacturers provide FD30 and FD60 doors, as well as fire safety papers, and you can feel confident that their bespoke fire doors are built from the highest quality materials.
Another important aspect that you should also keep in mind when having a fire door custom made is its installation, as installation of fire doors (despite the manufacturer's installation instructions) still has to meet certain requirements. Bespoke fire doors should be installed by a competent person, or an accredited (BM-Trada) fire door installer.
Some accredited fire safety companies can either provide you with bespoke fire doors or install internal fire doors that you have previously purchased. This is significant because poorly installed fire doors that do not adhere to the manufacturer's guidelines are ineffective and will not only forfeit your certification but will also endanger you and all occupants of your building. Poorly fitted fire doors can cause catastrophic structural damage to buildings as well as loss of life, resulting in massive penalties or even imprisonment under the current UK Fire Safety Order laws.
You can ensure that your fire doors, whether custom-made or standard, are entirely compliant by hiring an accredited, well-established, and renowned fire door installer. In the long run, it will also save you money, because if installed correctly, your fire doors will not be highly durable, but they will be easier to maintain. When these companies install any standard or bespoke fire doors, they strictly adhere to the manufacturer's instructions as well as the essential British Standards such as BS 8214.
Some fire safety companies can also sign off on your bespoke fire doors by employing BM Trada or FDIS Fire Door Inspectors. All fire doors are rated for fire resistance and are typically built of a combination of gypsum, glass, wood, aluminium, and steel. A fire rating means that, when correctly fitted, the fire door is expected to provide protection against fire and smoke and a means of escape for occupants for a certain time frame, during a fire outbreak.
Fire doors are therefore intended to be kept shut inside buildings that occupy people, and any gaps between the door and frame, or between the door and the wall, must be filled with a fire-resistant sealant.
Bespoke fire doors, like any other standard fire door, play an important part in saving lives and keeping fires from spreading. It couldn't be simpler to create your own custom fire door; all you have to do is pick the size and select a style.
About Us:
AJM Fire Safety is an industry leader in fire door installation, maintenance, inspections, and training in the UK. We are completely licensed and accredited to test, install, and repair fire doors, and we provide a one-stop solution for fire door compliance. We are experts in the field of fire doors and passive fire protection, and we hold a BM-Trada Q-Mark accreditation for fire door installations and maintenance. We are committed to high-quality workmanship and innovation to deliver a first-class experience and help you achieve fire door compliance. We can examine fire doors and perform repairs, as well as install new fire doors. Our FDIS (Fire Door Inspection Scheme) trained inspector performs our fire door inspections. Please visit our website https://ajmfiresafety.com at to find out more.