Radio Remote Control: Future Of Industries

By Author: anandrrc
Total Articles: 6
Comment this article

Wireless Remote Control for EOT Cranes and Overhead Cranes is the future of the industry. Wireless radio remote control is based on radio waves, when artificially generated radio waves control the crane or any type of machine wirelessly, this system is called wireless radio remote control.
A radio remote control that uses high-frequency radio waves to control heavy cranes is called an industrial crane remote control system. A remote control is used for different purposes such as lifting a heavy load, moving an object from one place to the desired place.
The remote control is used to control any type of machine or equipment with the help of radio waves. Crane remote is a small handheld and portable device. This device is used to control a crane, another device, or machine. Some wireless radio remote controls work on infrared (IR) waves and others use RF (radiofrequency) waves. When operating cranes and heavy machinery, the safety of equipment and personnel is always at risk. An industrial crane remote control system is the best solution to solve this problem.
Crane remote control transmitter and receiver:
...
... Radio remote control for cranes are divides into two sections transmitter and receiver. The transmitter is a handheld and portable device which sends the data towards the receiver. This signal is generated from the remote control and this encoded signal transmit to the receiver through an air medium.
The receiver side receives an encrypted signal and processes it. The receiver decodes the signal got from the transmitter and sends it to the assigned relay. When the signal is received to relay then it will activate or deactivate the desired switch on the crane control panel. The communication between transmitter and receiver happens more than ten times in a second.
The main function of the transmitter is continuously monitored the different functions of communication links such as successful transmissions rate, transmitted and received signal strength, no. of lost data packets, and so on.
Anand wireless remote control for crane uses 2.4 GHz frequency with automatic frequency hopping method. This hopping method is used to reducing any external or internal interference in both side communication and also increased the safety of the crane. Anand transmitter and receiver can transmit signal over a long distance.
Anand transmitter and receiver specification
1. Anand transmitter and receiver using 2.4 GHz frequency band.
2. Direct sequence spread spectrum technology used in communication.
3. 200 meters line of sight communication.
4. Single and double steps push buttons available.
5. Inbuilt radio antenna.
6. Low power indication sensor.
7. Emergency stop button to avoid any accident.
8. 128-bit advanced encryption standard key.
9. Misra C standard software used for security reasons.
10. Configurable tandem operation.
Safety Requirements for Radio Remote Control of Bridge Cranes:
Crane accident happens because of improper safety planning, lack of safety measures, lack of knowledge about the operation of cranes, and lack of well-trained operators. Another reason for crane accidents is heavy and excess load. An accidental electrical contact like shock can cause a crane accident. The crane accident is damages both the plant and the worker's health. Its physically harmful to the person and other workers within the surrounding coverage area.
To avoid this kind of accident the three key design considerations for crane remote controls are: the crane must be able to handle overloading, the crane must not tip over when carrying loads, and a crane must not be damaged while in operation. Another important factor is an aspect of radio remote control, especially when the crane is in operation, which is that no one can be hurt.
To avoid this type of accident, you must control the safety parameters of the radio remote control.
What is the application of crane wireless remote control?
Wireless remote controls are used in different applications. Different types of cranes require remote control devices.
• EOT crane
• Goliath crane
• Mobile crane
• Tower crane
• Hoist
• Gantry crane and so on
Conclusion
Anand Systems Engineering has introduced a customer-specific standard radio remote control for cranes with enhanced machine processing functions. The Anand radio remote control for eot cranes is manufactured with industrial quality and guarantees safety and productivity.
The best radio remote control for eot cranes is manufactured by Anand Systems Engineering Pvt. Ltd. The remote controls are more reliable and can be adapted to any type of crane.
With Anand Systems Engineering, operators can use a high level of safety to work longer and operate the crane easily. That is why the remote control system for industrial cranes stands out.