123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Technology,-Gadget-and-Science >> View Article

How To Use Crane Pendant Push Button Station For Eot Crane

Profile Picture
By Author: Anand Singh
Total Articles: 12
Comment this article
Facebook ShareTwitter ShareGoogle+ ShareTwitter Share

Crane pendant push button station:
The crane pendant is used in industrial sectors for overhead crane and hoist. The crane pendant switch is a part of the crane which is attached to the hoist. The pendant switch is the main part of the crane also known as the crane control unit or crane pendant station. The crane inspector or moderator checks the crane pendant station if anything does not work properly according to the system.
The pendant push button is connected to the hoist with a crane pendant cable wire. The wire is sling from the hoist and swings down like a pendant hence it is called a crane pendant push button station. The device is used to move the hoist in upward and downward directions like lifting and lowering the heavy objects. The crane pendant fully works on the electronic wired systems.

How pendant switch for EOT crane works:
The crane pendant switch for EOT crane is a transmitter in which there are many buttons like start, stop, up, down, left, right. And these buttons are interlocked horizontally. It means you cannot use other buttons at the same time. If a forward button is pressed ...
... at that time you cannot use the reverse button until the forward command is completed.
To control the operator sometimes we needed two operators. The first operator controls the movement of an overhead crane by sitting in the cabin of the crane while the other operator stands on the ground floor. The ground operator monitors and gives the signal to the other operator with the help of a transmitter which is attached to the overhead crane through wired systems.
The ground operator walks parallel with the crane when the overhead crane crosses the line due to wired connectivity. Through the wired transmitter, the crane can be moved in a direction like long travel, cross travel, and for the hoist. The pendant switch for the hoist works on the electric systems and they don't need charging or battery replacement systems. They take the electric power same as overhead crane gets.

The attribute of crane pendant control switch:
1. The buttons on the transmitter are easy to read.
2. The crane pendant push button is certified by the NEMA(National Electrical Manufacturers Association).
3. The device has a good grip so that it can be handled with one hand also.
4. The pendant push button is interlocked it means one button can be used at a time. If we want to move the crane in a particular direction then we have to keep the button press until the crane reaches its endpoint.
5. The device is made in such a way that it can prevent shock and corrosion.
6. For indoor and outdoor it provides the yellow enclosure.
7. The device is capable of performing in both AC(Alternate current) and DC(Direct current).
8. The pendant switch can be used as a single or double-speed operation.

The primacy of pendant push button control:
The crane pendant push button control is connected with many wires and works wired electric systems. The device has many wired routes. If any deadlock or problem occurs while communicating then it switches to other routes instantly. While in the case of radio remote control if any error is found during communication then it stops working.
The pendant switch provides fast and secure communication due to the wired system. The crane pendant push button does not interrupt by the external force or outsider attack due to its wired connectivity.

Conclusion:
Most people know that the industrial sector is increasing widely day by day due to the development of new things. To support the industrial works industrial goods are needed like a crane, manufacturing devices, crane remote, cable wire, and many more. So many manufacturing industries supply the crane pendant push button for the industry.
But the top quality pendant push button is manufactured only from the Anand systems engineering Pvt. Ltd. The Anand crane pendant is configured in such a way that it provides the stability and reliability for the device. The crane pendant devices are customizable according to the customer's need and made in such a way that they can be used for a long time.

Total Views: 45Word Count: 687See All articles From Author

Add Comment

Technology, Gadget and Science Articles

1. Ip Rating System; What Is The Meaning Of Water Proof & Water Resistant
Author: Elina John

2. Byod (bring Your Own Device) In The Workplace
Author: techframework

3. Mobikul Best Shopify Mobile App Creator Company In India
Author: Kuldeep Singh Tomar

4. Know About The Modified And Power Inverter Supplier Usa
Author: James

5. Software Development Company | Product Design And Development
Author: Neelima Ls

6. Spectralink Devices Have Now Received Zoom Phone Certification Upgraded Wireless Experience
Author: Angel Smith

7. How Is The Latest Algorithm From Google Extremely Non-profitable For Your Business
Author: Angel Smith

8. Utah Businesses Are Thriving Through Online Marketing And Seo
Author: techbored

9. Three Steps To Creating A Strong Brand
Author: techbored

10. Seo In Malaysia - Is It Worth The Hype?
Author: techbored

11. Playstation 6 Console With Wireless Features
Author: techbored

12. How To Write Unique Content With The Help Of Paraphrasing Tools
Author: techbored

13. Fix Err_timed_out|err_connection_timed
Author: techbored

14. Edtech In The Future
Author: techbored

15. Importance Of Resilient Ups System
Author: Benoit Technologies

Login To Account
Login Email:
Password:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: