Get To Know Various Angular Contact Ball Bearing Types And Their Uses

By Author: snehal desai
Total Articles: 95
Comment this article

Being a bearing that chiefly supports axial loads and acting radial loads, an angular contact ball bearing is largely used in applications under heavy load conditions. They offer high versatility with different types suitable for certain industrial uses.

Among a few bearing types that accommodate combined loads of axial and radial types, angular contact ball bearings are prominent for they have transposed inner and outer ring washers, which are relative to each other in the “bearing-axial direction”. The bearing has a high load-carrying capacity if its contact angle increases. The angular contact ball bearing unit allows the shifting of combined loads between the ring washers in a line perpendicular to the bearing axis during the operation.

What Are the Types of Angular Contact Ball Bearing Design Available?

Some prominent types of angular contact ball bearings used in industrial sectors are:

1. Single-Row Angular Contact Ball Bearings

Where applications demand handling one-directional axial loads, a single-row angular ...
... contact ball bearingis used.The bearing type allows better use with some adjustments against another bearing. The bearing ring washers have inseparable lower and upper shoulders, which make it unique. With a general design, the bearing undergoes adjusted arrangements by usingasingle-row bearing, with a number of ball rollers.

The inclusion of numerous ball rollers enables the bearing to handle heavy loads, as well as permit quick and easy accelerations and decelerations.



2. Double-Row Angular Contact Ball Bearings

The use of two back-to-backsingle-row angular contact ball bearings helps design adouble-row angular contact ball bearing.It supports combined radial and axial loads in two directions accommodating any misalignments during tilting. Known to accommodate less axial space, the bearing offers better performance capabilities, as well as tolerances owing to the stiff-bearing arrangement. The bearing design is much preferred for its large number of ball rollers in applications asking for a high load carrying capacity.



3. Four-Point Contact Ball Bearings

This type of angular ball bearing can handle two-directional axial loads and it consists of radial single-row angular contact ball bearings and washers. A four-point contact ball bearing handles especially axial loads with a limited radial load. There are two inner-ring halvesin a separable design. The outer ring can be replaced for it is a separate unit with ball rollers and a cage assembly and can be removed and mounted separately.

Several Applications of Angular Contact Ball Bearings

You can find angular contact ball bearingsin various designs to apply in electric motors, industrial pumps, compressors, material handling, and so on.

By supporting combined radial and axial loads, they are known for their versatility. This makes an angular contact bearingsuitable for general applicationssuch as clutches, gearboxes,electric motors, pumps, steel industry, wind mills, and otherhigh-speed applications.

Author Bio: snehal desai is a blogger specialized in writing technical articles for several websites. Her articles on angular contact ball bearings offer enough information of their uses in applications across industrial sectors.