How To Setup The Hp Printer After Unboxing It?

By Author: Tom johnson
Total Articles: 2
Comment this article

When a person buys the new HP printer from online shopping or from the store, unboxing it from the packing is a very difficult task but don’t worry we will tell you to step by step, and from these steps, you can unbox it easily.

Follow these steps to unbox it and also you can be setting HP printer

1. When the printer will be delivered or you reached home with printer, first step you have to do it the step is to remove the tape which is on it.

2. You will find the guides inside it for the all steps of the setup of the printer. And also you will the disk for your systems like windows or mac with the Steps to Setup & Install HP Printer on 123.hp.com.

3. Then it will be in a plastic bag then you need to remove the tape and unpack the printer from the bag.

4. There will be a power chord, plug one end of the chord and the other end to the wall outlet after that press the button of the power.

5. There will be ink bottles, lift them in the tank lid after that remove the cap of ink. now you can fill the ink tank ...
... with different colors in the ink bottle. The bottle of ink should be stored in some cool location.

6. When you filled the tanks than close them after that you need to install the print leads

7. Print heads to be removed from the package. The front door needs to open and the carriage moves the center.
8. Blue carriage latch open and slide the head of print until it snaps the place. Snap and slide both the print head given with the box.
9. After when the print head will install that push down firmly the print head latch. you have to close the latch properly because it will work properly when it will close properly.

10.Now close the print head access door and after that the front door.

11.Pull out the tray and also the sliding paper with the help of a guide out. Now load the blank white paper and adjust it carefully.

12.Also pull out the output tray and the extender

13.When you see the P blinking on the control panel that you have to press the resume button for the next seconds. When the A will come on the printer alignment page. Alignment is mandatory for the printer’s setup.

If you have any issue still you can visit - 123.hp.com

For more information visit : 123.hp.com