Sheet Metal Fabrication And Its Processes

By Author: Stuart Small
Total Articles: 914
Comment this article

What is Sheet Metal Fabrication?

The processes and techniques of shaping and bending sheet metals to create a variety of components are known as sheet metal fabrication. All sorts of sections and complex shapes can be given to the sheet metals. All products that contain any metal components will be required to proceed through some type of sheet metal fabrication. Many manufacturing fields such as computer, medical, appliances, or electronics often use this metal fabrication process.

Processes of Sheet Metal Fabrication

Different processes such as forming, cutting, and finishing are used in order to reach the final product in sheet metal fabrication.

Cutting

To fabricate a sheet metal at first it has to be cut into different shapes. Then the pieces are modeled or shaped into final pieces.
Shearing and electrical discharge machining are some of the cutting processes in shearing bigger pieces which are sheared into much thinner pieces. The operation of shear stress on a cutting machine will be needed for this process. In EDM conductive materials will then be melted ...
... from an electrode spark which comes from a small fully charged electrode that will be surrounded by iodized water.

Different tools like electrical powered shears and tin snips are often used for cutting sheet metals. Computer based equipments like Computer Numerical Control Punch Press or Computer Numerical Control Lasers may also be used. Tin snips is a hand tool that is required and used on a daily basis by a variety of companies. Electrical powered shears is often used and functional by the help of a battery powered electric motor. It has a crank drive and movable cutting blade for properly cutting sheets of metals. Next a laser light will be pressed across the surface of the metal sheet in order to cut in Computer Numeric Control lasers cuts. In order to cut the metal into different sizes or shapes like square, hexagon and circle the Computer Numerical Control Punch Press will need to be used. Water jets can be used to cut sheet metal as well. It uses the high pressure water ranging from twenty thousand to sixty thousand psi in order to cut the metal properly. It doesn’t generate any type heat while its being used for cutting which is an important factor.

Forming

After cutting the metal sheet, it has to be shaped into its required shape to create a component and this process is known as forming. It refers to the variety of ways that are used to shape sheet metal into a variety of forms. While forming a metal sheet take care of the ductility, ability of the sheet metal to allow it to be manipulated without fracturing.

Rolling, shape flat pieces of metal over and over by the use of roll stands, Bending and forming, hand based process used to get the desired shape on the sheet metal, Punching, used to punch holes in the metal, Welding, used to join pieces of sheet metal together, Stamping, tools and dies are used to stamp designs into the metal, Hardware and fastener creation methods, used to add latches or handles to the sheet metal, are the processes of forming sheet metal.

Finishing

Every sheet metal goods have to go through the process of finishing to eliminate or to polish rough spots and edges.
After going through all of these processes we find finished sheet metal goods.

Now-a-days, with the advancement of technology, many of these techniques are now applied with the use of computer controlled machinery. Instead of opening a factory to create their own metal products, a company might hire a sheet metal fabrication specialist to do the work for them. This gives the company more time to focus on marketing and promotion and can also save money.

Author About:

Stuart Small from Stevens Rowsell Sheet Metal Engineering writes about Sheet Metal Fabrication. For more information about Sheet Metal Fabrication visit www.stevensrowsell.com