Everything You Need To Know About Maintaining Or Replacing Your Tyres At Home

By Author: Emily Sara
Total Articles: 265
Comment this article

It is difficult to take your car to the auto repair shop during the current situation with Covid-19. As risky it might be, your car needs its regular inspection and maintenance to function properly.
You can look online for a mechanic near me who is taking special care of the whole stay germ-free situation. You can find repair shops that are strictly following the SOP’s and running a viable car service business during Covid-19.

Still, doubt going out? No need to worry. You can inspect your vehicle and perform the precautionary steps at home. If you are new to all this, then you should start with inspecting the tyres. Tyres are the most important parts of the car and they are also easy to inspect and maintain.

Why regular inspection of your tyres is important?
Maintaining the tyres of your vehicle is necessary as they can affect safety and performance. Worn out tyres can affect the accelerating and braking. They can breakdown in the middle of nowhere and leave you stranded. They should be changed instantly even if they are a little bit damaged. Wheel alignment is a process that is followed to reduce ...
... the wear of the tyres and to ensure that the vehicle travels straight. It is necessary for a safe ride.

Steps to inspect your tyres at home:
· Check the depth of the treads and also look for any cracks or damage in the treads. (to check the depth of the tread you can use the penny method.)
· Inspect the pattern of the tread. (it should be even and not worn out.)
· Check the sidewall of the wheel. (over-inflation or under-inflation can damage the sidewalls)
· Do these steps to inspect all four tyres.


Importance of accurate tyre pressure:

Tyres are the only points of contact between your car and the road, and they have a major role in braking, accelerating, and taking a turn. If the pressure of your tyres is properly maintained then it will increase the tyre's life, traction and also provide better handling. Checking and maintaining tyre pressure is one of the easiest tricks you can do to keep your car in check.

Tools required to check the pressure and correct it?
You will need a common tyre gauge and compressed air.
You can get the compressed air at gas stations, vehicle dealerships, or you can search online for car service near me, it’ll show you all the car service centers around you. From there you can get the compressed air.

Steps to check the pressure of the tyre:
1. Inflate the tyres to the correct pressure only when they are cold. It can be done in the morning when the vehicle has been sitting. You will need to check the owner’s manual to see the correct recommended tyre pressure.
2. Unscrew the valve stem’s cap.
3. After unscrewing the cap, put the tyre gauge next to the valve quickly and seal it. Swiftly remove the gauge from the stem after the dial moves. If any air is escaping, then stop, reset the gauge and try again.
4. Check if the pressure shown on the gauge is equal to the recommended one.
5. If the pressure is low, then inflate the tyre with compressed air.
6. After adding the compressed air, check again if the pressure is right.
7. If the tyre is over-inflated, then release some air from the tyre.
8. After releasing the air, check it again with the gauge.
9. Add or remove any air according to the reading on the gauge.

If you feel like there is some damage that you cannot handle, then you should look for car repair near me and take your car for repair before it’s performance is affected.