All Things Abou Cccam & Receiver

By Author: upc
Total Articles: 1
Comment this article

Frequency: It is a number that is set on the receiver and indicates the actual frequency of a TV channel or radio station. In general, we have two types of frequencies, the C-band ranges from 3 to 4 GHz and the KU band frequency is between 10 and 12. GHz.

SR: or symbol rate, indicating the number of megabytes sent per signal per unit time.
FEC: taken from Forwarding Error Correction and provides the ratio between bytes of original information and bytes of error correction. This ratio ranges between 1.2 and 7.8. The important point is that the higher this ratio, the stronger the satellite signals. In contrast, more channels can be received by a single carrier.
POL: stands for polarization and indicates the type of frequency transmission, each frequency can receive the satellite signal in two different ways.
1. The method of linear transmission appears in two forms: Horizontal (H) and VERTICAL (V).
2- Circular or circular transmission, which is in two forms: right hand (R), right hand, left hand (L), left hand.
The linear signal transmission system is used in the KU band and the circulation ...
... system is efficient in the C band.
VPID: means "video program identification" and it is the information code for digital signals to identify it. It should be noted that in radio signals since no picture is received, the fixed number 8191 is repeated in the VPID section.
APID stands for Voice Program Identification and represents the Voice Recognition Code.
PCR: Used to synchronize the audio and video of a channel, this number is usually calculated automatically by the receiver.
SID: Derived from the term Serriee Identification and denotes the type of digital service provided and modifying it to prevent mixing of frequency channels

Receiver: (Set Top Box) (STB)
It is a device with the task of analyzing the incoming signals from the dish and LNB and converting them into audio and video.
DVB Card:
It is a device that installs on a PC's PCI slot and can broadcast and record satellite channels. It can also be used to receive the internet via satellite. These cards can open the card channels using programs called plug-ins.
Delivery in:
It is a program that installs on a computer that can simulate a (low) code for the receiver card. The connected channels can be opened using plug-ins.
Free To Air or: (FTA)
You do not need a card or any other device to watch these channels and their waves are freely sent (clean).
Mixed Channels or: (PAY TVs)
To watch the card channels in standard mode, you must use the corresponding (low) symbol for this type of encoding system and its card. These cards are not permanent and usually need to be recharged every six months or a year. But by patching the receiver, you can unlock the channels without requiring low or original power.
Low:
It is a device into which the cartridge is inserted. There are different types due to compatibility with coding systems. Some only support one system, while others support multiple systems. Genres that support multiple systems include Zeta, Magic Low, Freak, Matrix, Reload Matrix, Dragon, Dragon II, Joker, and more.
Multi Cass:
Multix or Multi-bit is said to support multiple systems, and of course, it usually only refers to youngsters who were pure in the beginning (i.e. they only support one system) and then support the rest of the systems on it. Simulated. It is sometimes referred to as All Cam, which is a misnomer, and there is still little that fully supports all coding systems.

What is Cccam?

Many of the popular available TV channels have restrictions. In order to access this service, you need to buy subscriptions, which are expensive.

The Cccam system works in such a way that by purchasing an account, you will have access to the whole packages at once at a reasonable price and high quality
https://canvas.mooc.upc.edu/eportfolios/1009/Home/all_things_abou_cccam__receiver
https://landcccam.com