Structural Features Of Manual Pcd Tool Grinder

By Author: yanghuimin
Total Articles: 132
Comment this article

PCD tool grinding machine is specially designed for grinding punching tools and dies used in CNC turret punch press. The diameter of cylindrical punching tools by this automatic Demina tool grinding machine is 150mm.
The rotating worktable of this Amada tool grinding machine is inclinable to be 0-15 degrees which is suitable for grinding rooftop tools. The new improved automatic tool setting function makes tool grinding much simpler. Similar to the Japanese tool clamping method.
PCD tool grinding machine the dual-way water cooling system and high grade grinding heel prevent tools from burning and so raise the life of tools. Both punches and dies used in CNC turret punch press can be ground by this automatic Amada tool grinding machine.

Sharpening scope of PCD tool grinding machine
In the hole, outer annulus, column, trench, taper, end mill, disc cutter, lathe tool, square shape, and diamond cutting tool, gear cutting tool, and so on. The working table uses a dovetail guide rail or high precision straight line roiling guide rails, good back and forth movement, high stability, steady bed platform, dexterous ...
... operation.

PCD tool grinding machine the motor can rotate 360° in the horizontal plane, the grinding wheel can be clockwise and anticlockwise rapidly. When grinding different kinds of material's cutter, you can turn the grinding wheel, which can add safety and reduce the time of replacing and dressing the grinding wheel, adding controllability of cutter grinding. The standard accessory can grind lathe tool, end milling cutter, face, and side cutters, hobbing cutters, circular paper.

Structural Features of Manual PCD tool grinder
1.Machine tools,electrical,hydraulic control,manual control Bassel.

2.Manual PCD tool grinder base type machine left and right using an adjustable cross chuck. improve workpiece installation, adjustment efficiency.

3.With top of the workpiece clamping chuck.the head frame motor drive, manual feed grinding

4.Longitudinal movement, there is also a manual maneuver, maneuver the table in a fast-moving action can only point for jumping stalls or adjustments.

5.About the amount of cross chuck maximum adjustable vertical 110mm, transverse 2mm, the chuck further hang a trace swivel adjustment, the range of 0-30 °

6. Manual PCD tool grinder parts, wheel, bench, cooling pump, oil pump is driven by a separate motor.