123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Home-and-Garden >> View Article

How To Make The Paintbrush Sustain For A Long Time: Home Painters Tips

Profile Picture
By Author: Unistar Painting
Total Articles: 5
Comment this article
Facebook ShareTwitter ShareGoogle+ ShareTwitter Share

The best painting results come out when the brushes used are in good condition. So, how do you make your paintbrushes last longer and in perfect condition?

While You Are Painting

• If you take some break while painting, place the brush in a good-quality pail and ensure it is standing upright.

• Fill your pail with some paint such that the paint does not dip the paintbrush up to the ferrule (the metallic section of the brush between the handle and the brushes).

• Every time you place the brush in the paint; try to tap off any excess paint that gets to the bristles.

• Keep the bristles of your brush moist until you complete your painting task. It will be easier to clean them once they are moist.

Cleaning the Brushes

• After completing the painting work, wash the pail and add some water into it.

• Using a wire brush, scrub out any excess paint but do it gently because scrubbing too hard may cause the bristles to fall.

• After scrubbing, put dip the brush in the pail and swirl it within the water until any remaining paint gets off of the bristles. Repeat ...
... the same a few times while using clean water each time until all paint is removed from the bristles – the water should be colourless after swirling the brush in a pail.

• Squeeze out excess water from your brush with your hands. If you are using a smaller brush, then absorb the excess water using a blotting paper. If the brush is flat and broad, you can tap its ferrule on the brim of one of your shoes. Don’t try this if you’re wearing flip-flops or open shoes.

During storage, keep the brushes covered in newspapers and then place them in their cases or any other boxes.

Hope these tips proves to be useful. For any home painting query, do feel free to contact Unistar Painting in Melbourne.

More About the Author

Unistar Painting is a professional interior and exterior painting contractor in Melbourne that has been in business since 2016.

Total Views: 469Word Count: 317See All articles From Author

Add Comment

Home and Garden Articles

1. A Complete Guide On Building Repair Services
Author: Christian Zox

2. Indoor Vs. Outdoor Mold Spore Comparisons: What Mold Inspectors Evaluate
Author: BayAreaMoldPros

3. Why Waterproofing Is Necessary- An Overview
Author: Christian Zox

4. What Credentials Should A Professional Mold Inspector Have? Certified Mold Inspector Vs. Licensed Contractor
Author: BayAreaMoldPros

5. Thermal Imaging For Mold Inspection: What Infrared Cameras Can—and Cannot—detect
Author: BayAreaMoldPros

6. Mold Testing Limitations: What A Laboratory Report Cannot Tell You
Author: BayAreaMoldPros

7. Crawlspace Mold Inspection: Moisture, Ventilation And Structural Risk Factors
Author: BayAreaMoldPros

8. What Your Peeling Paint Is Trying To Tell You?
Author: Jake Deering

9. Attic Mold Inspection: Condensation, Roof Leaks And Poor Ventilation
Author: BayAreaMoldPros

10. Bathroom Mold Inspection: Distinguishing Surface Mold From A Moisture Problem
Author: BayAreaMoldPros

11. Mold Growth Behind Cabinets, Baseboards And Wall Cavities: What Inspectors Look For
Author: BayAreaMoldPros

12. Why Is Choosing Strata Painters A Good Idea?
Author: Jake Deering

13. Advanced Mold Testing Explained: Ermi, Mycotoxins, Dna & Traditional Testing
Author: BayAreaMoldPros

14. Hepa Vs. Standard Air Filters For Mold: How Hepa Air Purifiers Capture Mold Spores
Author: BayAreaMoldPros

15. How To Read A Mold Test Report: Understanding Mold Species, Spore Counts & Aspergillus/penicillium
Author: BayAreaMoldPros

Login To Account
Login Email:
Password:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: