Charcoal Machine Propeller

By Author: ABC Machinery
Total Articles: 41
Comment this article

Brief introduction:

Charcoal machine propeller is also called rod making machine screw, rice husk briquette machine push rod, propeller is an important part of the accessories of charcoal machine. Under normal use, the propeller should be removed and repaired after about 12 hours, but some materials have different texture, which may need to be removed and repaired in a shorter time (the wear resistance and heat resistance of the welding rod used in the repair may also affect the service time).

Job structure

Propeller is an important part of charcoal machine accessories. Propeller is an important part of charcoal machine accessories. Under normal use, the propeller should be removed and repaired after about 12 hours, but some materials have different texture, which may need to be removed and repaired in a shorter time (the wear resistance and heat resistance of the welding rod used in the repair may also affect the service time).  

Used to repair

The thrusters in the charcoal machine equipment (briquette machine ...
... are a headache for many users. On one hand, the thrusters are easy to wear out; on the other hand, they are a problem to repair. What better way to increase the life of a thruster? How do you protect the propeller to increase its life span? First of all, we all know that the technical requirements of repairing thrusters are very high, and only by mastering the maintenance technology can we improve the production. The ways to repair the thrusters of the small briquetting machine include:

1, the use of welding material quality is too short, due to wear resistance and high temperature, the market generally used welding rod welding, about five to ten hours, must use good materials, we have good materials such as qualified welding can be used about more than 100 hours;

2, welding technology is not good, most of the market is welding with electric welding, long so far only use 30 hours or so, because electric welding can not solve a high temperature problem, and wear resistant materials in electric welding is difficult to dissolve into the steel quality;

3, due to different materials to use different compression ratio, this is a lot of propeller do not know what the problem, the axis is also positive, has not been worn, a good day but not two days, do not make a good. The fineness and roughness of the material have different requirements on the propeller. Generally speaking, the compression ratio of miscellaneous wood is small, the compression ratio of fir is large, which is also the reason why many people say that sawdust of fir wood is not worth anything and cannot produce a bar, which needs to be judged by the production staff according to experience and materials. It is good that a factory should be equipped with propeller for making a variety of materials, and all kinds of materials should be roughly separated.

ABC Machinery business is to delivery turnkey projects and services within the field of machinery of biomass densification, grain processing. Our core business is to delivery technology, engineering turnkey projects and services over the world within the field of machinery of biomass densification(pelletizer machine), grain processing: edible oil factors affecting extraction process, refinery and grain milling(flour mill business).