Working Principle Of Automatic Oil Press

By Author: Liu
Total Articles: 41
Comment this article

When the fully automatic oil press is in operation, the processed blank enters the pressing chamber from the hopper. The screw is pushed inward by the screw to press. Because the feed embryo is in motion in the press chamber of the automatic oil press, under the pressure of the press chamber, there is great friction resistance between the feed embryo, the press screw and the press chamber, which causes friction and relative motion between materials. The root diameter of the screw is gradually thickened. When the pressed screw rotates, the threads enable the blank to advance and turn outwards, and at the same time, the blank layer near the surface of the pressed screw rotates along the pressed axis, so that each blank particle in the pressed chamber does not move in the same direction at the same speed, and there is relative motion among the particles. The heat generated by friction also meets the heat required in the oil press process operation, which helps to promote the thermal denaturation of protein in the feed embryo, destroy the colloid, increase the plasticity, and reduce the viscosity of oil and easily precipitate oil, ...
... thus improving the oil yield of the automatic oil press.

ABC Machinery multi-function cottonseed oil mill plant is the earliest domestic development of automatic oil press machine, the machine set heating, oil press, oil filter as a whole, automatic operation, raw materials into the machine can be pressed oil, simple and convenient, improve work efficiency.

2. Automatic temperature control, easy to operate, oil drying, oil pressing into the bore, wool oil filtration and other strict temperature requirements, ABC Machinery oil mill new cold and hot dual function screw oil pressing machine equipped with a unique automatic temperature control system, so that its operation more simple, higher degree of automation.

3. Multi-stage pressing, high oil yield. The multi-function screw oil press adopts multi-stage pressing, increases the pressure point, carries on multi-stage propulsion, strengthens the pressing degree to the raw material, improves the oil yield, and speeds up the working efficiency.

4. Pressing chamber modification, reasonable design

The traditional pressing and boring groove design is not reasonable, resulting in incomplete oil flow, much of which is wasted. ABC Machinery Oil Mill new multi-functional screw oil mill on the pressing and boring has been completely transformed, unique internal groove design, more convenient for oil flow, from the hardware to further improve the oil yield.

5. High efficiency fine filtration, pure oil

ABC Machinery oil mill new multi-functional screw oil press adopts a variety of fine filter system devices, to achieve the real sense of the press and filter as a whole, improve the degree of automation of the oil press, completely solve the problem of oil purification.(small oil filter press machine)

6. Simplify the run-in process. Run-in is an essential operation of the traditional oil press, which is very complicated and easy to break down due to poor mastery, which directly affects the pressing speed and normal oil production. ABC Machinery safflower oil extraction machine factory new multi-functional oil press in the country to take the lead in the introduction of special equipment -- pulping machine, so that a variety of models of oil press parts of the pressing surface once drawing molding, and automatic precision polishing, improve the pressing system processing precision and smoothness, after the user bought the machine, just a simple squeeze can be put into normal production.

7. High production capacity and efficient operation. After adjusting the feeding system and making creative technological innovation on the screw, the feeding speed is obviously accelerated and the output is significantly increased.

ABC Machinery business is to delivery turnkey projects and services within the field of machinery of biomass densification, grain processing. Our core business is to delivery technology, engineering turnkey projects and services over the world within the field of machinery of biomass densification(pelletizer machine), grain processing: edible oil factors affecting extraction process, refinery and grain milling(flour mill business).