123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Home-and-Garden >> View Article

Common Problems With Solar Panels

Profile Picture
By Author: Edmund Brunetti
Total Articles: 753
Comment this article
Facebook ShareTwitter ShareGoogle+ ShareTwitter Share

While solar panels are often touted as a one-and-done solution to energy problems, they are much more than that. They are simple to operate because the sun does most of the work, but like everything else, they do require maintenance and occasionally, repairs.

These are some of the most common problems that can affect solar panels, and how they can be taken care of by the average homeowner.

The Weather

Since the solar panels are going to go on the roof, one of the biggest concerns is the weather. Rain, hail, thunder, and winds are some of the most likely suspects for damage to solar panels. However, the weather actually doesn’t do as much damage as people think. The panels are designed to be durable and are specifically tested in extreme weather conditions.

Even heavy hail storms don’t cause too much damage to solar panels, as there have been incidents where hail has dented roofs and broken windows but hasn’t even scratched the paint on solar panels. So, with the main culprit out, what else could cause damage to your solar panels and necessitate solar panel repairs on the Mornington Peninsula?

Keeping ...
... Them Clean

Neglect can also cause problems for your solar panels. They work by having solar cells soak in as much solar energy as they can, and if the panels are covered in dirt, grime, bird poop, or other pieces of debris, then they won’t be as effective. If the solar panels for your home are neglected and not cleaned off, then after a while the sun’s energy won’t be absorbed as well.

So simply washing the panels with a water hose and a washcloth can be enough to keep them clean, and you’ll only have to wash them every few months or so.

Doing Repairs

Since solar panels are built to be tough and resistant to the elements, chances are you might never need to do more than just a quick cleaning. However, on the off chance one of them breaks, you’ll need to speak to a professional to make sure they are repaired and back to working order quickly. Most problems often happen inside the panel. Problems with the electrical components are best fixed by a professional solar panel repairs service in Mornington Peninsula, and of course, micro-cracks can develop.

The Smallest Cracks, the Biggest Problems

Micro-cracks are small cracks in the panel that the naked eye can’t see, at first, but if the cracks are aggravated, they can make the panels ineffective. These cracks can either be caused by mishandling during the installation or simply by the weather and changing temperature.

Those should be fixed by a professional, hopefully before they become a major problem.

Don’t become complacent and trust in the durability of the solar panels for homes, because while it is impressive, it doesn’t mean that the solar panels are completely invulnerable to damage. So taking the time to inspect them and keep them clean will pay off and keep them working for many years after you get them installed.


Are you looking to find reliable solar panels for your home? Then look no further. Solar Super Centre also provides solar panel repairs across Mornington Peninsula and South East Melbourne.

Total Views: 610Word Count: 527See All articles From Author

Add Comment

Home and Garden Articles

1. A Complete Guide On Building Repair Services
Author: Christian Zox

2. Indoor Vs. Outdoor Mold Spore Comparisons: What Mold Inspectors Evaluate
Author: BayAreaMoldPros

3. Why Waterproofing Is Necessary- An Overview
Author: Christian Zox

4. What Credentials Should A Professional Mold Inspector Have? Certified Mold Inspector Vs. Licensed Contractor
Author: BayAreaMoldPros

5. Thermal Imaging For Mold Inspection: What Infrared Cameras Can—and Cannot—detect
Author: BayAreaMoldPros

6. Mold Testing Limitations: What A Laboratory Report Cannot Tell You
Author: BayAreaMoldPros

7. Crawlspace Mold Inspection: Moisture, Ventilation And Structural Risk Factors
Author: BayAreaMoldPros

8. What Your Peeling Paint Is Trying To Tell You?
Author: Jake Deering

9. Attic Mold Inspection: Condensation, Roof Leaks And Poor Ventilation
Author: BayAreaMoldPros

10. Bathroom Mold Inspection: Distinguishing Surface Mold From A Moisture Problem
Author: BayAreaMoldPros

11. Mold Growth Behind Cabinets, Baseboards And Wall Cavities: What Inspectors Look For
Author: BayAreaMoldPros

12. Why Is Choosing Strata Painters A Good Idea?
Author: Jake Deering

13. Advanced Mold Testing Explained: Ermi, Mycotoxins, Dna & Traditional Testing
Author: BayAreaMoldPros

14. Hepa Vs. Standard Air Filters For Mold: How Hepa Air Purifiers Capture Mold Spores
Author: BayAreaMoldPros

15. How To Read A Mold Test Report: Understanding Mold Species, Spore Counts & Aspergillus/penicillium
Author: BayAreaMoldPros

Login To Account
Login Email:
Password:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: