Facing Intermittent Connection Problem On Your Netgear Range Extender 2700?

By Author: coaldrakewilliam
Total Articles: 3
Comment this article

When you try to connect any device to your Netgear extender 2700, you find ‘connection error’or ‘Intermittent connection’ message on the screen. This problem is quite common and has been faced by the number of users. If the Netgear Wi-Fi extender not working or is not getting a proper signal from the router, then you will find this error message. Nothing to worry, we are going to walk you through the steps by implementing which you can easily fix the problem.

Update the firmware of your Extender: This is the most common solution to the intermittent connection problem. The steps to update the firmware are:

• Connect the Netgear Ex2700 setup to the power supply with the help of an adapter.
• Check the distance between range extender and router. The device that is connected to the extender must be within the range of the network.
• Open the user-interface of your extender by entering www mywifiext net ...
... This is the default address and local address for setup and changing the basic settings.
• If you are asked to enter the username and password, then enter the default username and password else enter the email address you entered during the setup.
• From the login window, you can click on the device name and check the firmware version installed.
• If any new update is available, then you can download the update on your computer. Most of the time, you get an alert message on screen reminding you of the update available for download.
• Open the ‘Device’ update page and click on ‘Check’. It will take 2-3 seconds to check for updates. Tap ‘proceed’ to go further.
• If the extender you have purchased is not too old, then there are chances of having the latest version of firmware pre-installed in it.
• Read on-screen instructions and click on ‘What to do next’.
• Once the device is updated and the firmware version is installed successfully. You can now reset the device by pressing the reset button with the help of a sharp tip pen or pencil. Restart extender by connecting it to the power supply
• Wait till the power light gets stable.
• Connect the device to the Extender 2700 either using the wired or wireless connection. You will require an Ethernet cable for wired connection.
• Reconfigure the extender on the device by reading on-screen instructions.
In this manner, you can troubleshoot intermittent connection problems on your Netgear range extender 2700. We hope the steps will definitely solve the problem. If you are still facing the problem, then try to bring the router and extender close to each other and see if the connection status light is blinking on the hardware or not.

Sometimes, you might come across issues that can’t be resolved from your side and need expert assistance. In such cases, it is recommended to contact the experts available 24x7 at www.mywifiextfix.com link. They will diagnose the problem first, then provide an efficient and reliable solution to it.