Pipe Bending – All You Need To Know!

By Author: Peter Angelico
Total Articles: 11
Comment this article

The techniques employed when bending pipes and tubes using pipe benders are fairly simple. Pipe bending in Australia, commonly called tube benders, come in a lot of variety. Predominantly, they work electromechanically. Thanks to the latest technological developments, these machines are capable of accelerating production and improving repeatability. At the same time they are reducing the number of errors in production at every scale. The main parts of pipe bending machines are mentioned here.

Mandrel

In bending steel and aluminium tubes, mandrel bends Australia is necessary for more difficult jobs. Bending a small radius, thin tubes or harder materials can result in an unsatisfactory outcome. In those cases, a mandrel can be handy. The mandrel’s objective is keeping the tube from collapsing.

Wiper Die

A wiper die places just after the bend die. The purpose is to ...
... avoid the formation of any humps on the inside radius. During the forming process, the material turns plastic during bending. It may result in wrinkles with large deformations. Thus, adding a wiper die just after the bend die helps to smooth the surface.

Pressure Die

The pressure die makes sure the tube follows the bend die’s contour.

Clamp Die

The clamp die presses the tube onto the bend die. Its main purpose is to prevent the pipe from slipping.

Bend Die

The bend die, also known as the bend form or the radius die, is the most important part of a rotary-draw bending machine. The tube clamps to the bend die and the drawing process produces the necessary bend. The selection of die is very important, as the tube’s inside radius depends on it.

Application Of Different Types Of Pipe Bending Machines

Induction Bending Machine

The Induction Bending Machines are used in large industrial structural parts, short radius bends, heating system parts, thick-walled parts, etc.

Orbital Head Bending Machine

The Orbital Head Bending Machines are used in air conditioning, automotive and other complex parts.

Vector Tube Bending Machine

The Vector Tube Bending Machines are used in aerospace and automotive industry.

Ram Bending Machine

Ram Bending Machine is used for simple bends where accuracy and a constant cross section are not that important.

Roll Bending Machine

Roll Bending Machine is used in coils of pipe, long bends with a large radius.

Rotary Draw Bending Machine

Rotary Draw Bending Machine is used in handrails, frames, automotive roll cages, handles, etc.

If you are looking for safety rails in Australia, you can contact ABECK Group.

The author of this article has been working in a company that offers Pipe bending in Australia. In this article, he has mentioned a few things you need to know about pipe bending. Visit https://www.abeckgroup.com.au/

ABeCK Group comprises two vibrant, energetic companies with proven track records of delivering customer satisfaction and value.