3d Bends And Applications Where 3d Bends Are Used

By Author: Jeeten Gupta
Total Articles: 737
Comment this article

Metals are used in Every Project, but there are a Few places in which the Pipe has to be fitted has to go around a Corner, or the pipe has to be bent for its Coverage. For this type of Structure, Elbows with Different angles and some other Pipe Bends also known as Long Radius Bends Can be used. Sometimes, a custom bend will be required to make the pipe fit precisely around an obstacle or to follow a curve perfectly. Pipe can be custom-bent with presses or more complex machines using one of several common methods, including ram bending, rotary draw bending, compression bending and three roll bending, among others. Separate dies are typically required for each size of pipe and each different bend radius, except on more complex machines.

What are 3D Bends?

A 3D Bend is a type of pipe bend in which the radius of the curve is equal to 3 times the diameter of the pipe. 3D Bend is Smoother than 2.5D Bend and Sharper than 5D Bend.

Specifications of 3D Bends

• Size: 15NB to 900NB

• Type: Seamless 3D Pipe Bend / Welded 3D Pipe Bend / Fabricated 3D Pipe Bend / ERW 3D Pipe Bend ...
...

• Width: 500 to 2500mm

• Length: 500 to 10000mm

So, here are a Few of the Places where you will find 3D bends being used:

1. Furniture

3D Bend are used in Furniture for structural Purpose. Various Furniture items Requires Steel Bends to Provide Support. Metal Chairs, Couches, Wardrobe uses this Bends to provide a nice gentle curve that is both pleasing to the eye and the Structure.

2. Plumbing

3D Bends are Quite common in the Plumbing Industry They are incorporated anywhere that standard elbows cannot be relied upon to bypass obstacles or to change the angle of the pipe Custom bends are used in plumbing of all kinds, from the pipes in your home, to the pipes in chemical plants, food processors or refineries.

.

3. Pipelines

Gas and oil pipelines, like any plumbing system, often use 3D bends in many places along their lengths. Unlike typical household pipes, however, these are typically much larger, and require some serious machinery to do custom bends. Gentle bends help the high-viscosity oil flow through the pipes easier, and they help natural gas flow smoother, reducing pipe fatigue and the chance of leaks.

4. Fencing

The 3D bend is also quite common in fencing, for both decorative and structural uses. It is seen extensively in galvanized chain-link fencing, especially to add a gentle curve to gates and other decorative items, or in custom-designed fencing. Pipe is also used regularly in fencing for cattle, horses and other livestock, as well as for domestic pets, and often decorative touches are added that require custom bends.

For a Complete list of Bends used for Various Purpose, Check this Article