Astm B209 Aluminum Sheet

By Author: Karan
Total Articles: 740
Comment this article

ASTM B209 / 7075 aluminum is a 7000 series aluminum alloy: the prime alloying addition is zinc & it is formulated for prime forming into wrought products. The properties of 7075 T6 aluminum include 17 common variations. This page shows a summary range across all of them. For more specific values, follow the links immediately below. The graph bars on the material properties cards further below compare 7075 T6 aluminum to 7000-series alloys (top), all aluminum alloys (middle), & the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it’s 50% of the highest, & so on.

About ASTM B209 Aluminum-

T6 temper 7075 has an ultimate tensile strength of 510–540 MPa (74,000–78,000 psi) & yield strength of at least 430–480 MPa (63,000–69,000 psi). It has a failure elongation of 5–11%. Aluminum Alloy Sheet is the most widely used form of Aluminum Alloy. It is commonly used for construction, aerospace & defence applications. The T6 temper is usually achieved by homogenizing the cast 7075 at 450 °C for several hours, quenching, & then ...
... aging at 120 °C for 24 hours. This yields the peak strength of the 7075 alloys. The strength is derived mainly from finely dispersed eta & eta’ precipitates both within grains & along grain boundaries. Plus Metal provides the best range of high-quality 7075 T6 Aluminum Sheet in India.

Applications of ASTM B209 Aluminum

Due to its high strength-to-weight ratio, aa7075 is used for highly stressed structural parts. Applications include aircraft fittings, gears & shafts, fuse parts, meter shafts & gears, missile parts, regulating valve parts, worm gears, keys, & various other commercial aircraft, aerospace & defense equipment & components.

ASTM B209 Aluminum Fabrication and Heat Treatment

• Machinability Aluminum 7075 alloy can be machined in the annealed condition. Oil lubricants are used for performing machining operations.
• Forming Aluminum 7075 alloy can be formed in the annealed condition. It can be warmed at 94 to 122°C (200 to 250°F) if any difficulty is encountered.
• Welding Aluminum 7075 alloy can be welded using a resistance welding method. The gas welding method is not preferred for welding this alloy. Arc welding method should also be avoided as it results in the degradation of corrosion resistance property of this alloy.
• Heat Treatment 7075 aluminum alloy is annealed at (900°F) for 2 h followed by water quenching & precipitation hardening heat treatment.
• Forging Aluminum 7075 alloy is forged at 372 to 483°C (700 to 900°F).
• Hot Working Aluminum 7075 alloy can be hot worked at 122°C (250°F)
• Cold Working Aluminum 7075 alloy can be cold worked using conventional methods in soft & annealed conditions.
• Hardening al7075 alloy can be hardened by precipitation heat treatment.

tu buy visit: https://www.aluminiumwala.com/blog/astm-b209-7075-t6-aluminum-aa7075-al7075/