Diy Tips For The Perfect Laminate Flooring Installation

By Author: laminate flooring supplier, laminate flooring stoc
Total Articles: 9
Comment this article

DIY is the new trend, as the social media is filled with DIY videos and inspirations. Laminate flooring is one such incredible home improvement element, that radically promotes the idea. While, it all seems quite easy, there are few elementary jobs to undertake between “choosing the perfect floor” and “installing it”, that’s what we are going to talk about right now.

Start With Measurement

The measurement of your room for the purpose of floor-fitting, goes by the rule of : length multiplied by width. In Ireland the metric used for this purpose is m². However, it does not suffice by just going for a corner to corner measurement, the method to do this is to take your measuring tape on an inch-by-inch format, keeping steps, thresholds, door frames all into the equation. This is mostly significant for rooms with unusual shapes, such as corner rooms, attic rooms, under the stair spaces and basements.

Purchasing The Floors

Once you have this measurement, then take it to the laminate flooring supplier, with whom you may discuss the actual size of your floors. To curb the wastage of any material, you must have a m² measure. A number of laminate flooring distributors in Ireland offer visualization and sampling facilities, with which you can accurately measure the entire area and get your floorboards cut precisely by the measurements, thus minimize the risk of wasting or falling short of the required volume of floorboards.

Moisture Barrier & Underlayment
Many people confuse the moisture barriers and underlayments to be the same thing, which they are not. The moisture barrier is usually made of plastic that can keep any damp and floor vapors from below the floors, especially for ground floors, away from creeping in through the floors. The moisture barrier is a sheet of plastic, or aluminum, the underlay on the other hand, works as a base for the laminate floors, that keeps it in place, and reduces noise and creaking with it’s cushion like support. It is important that you install both of these materials, until and unless your laminate floors don’t come with a built in moisture barrier.

Cutting & Fitting Your Floorboards
Some rooms with also have fireplaces, archways, and other structures that will matter for laying the floorboards. You have to keep in mind that you will be filling this space with tiles or planks of the same size, and the boards need to be cut, to fit the perfect cubby. The first and last plank can be cut to seal the flooring. Moreover, since laminate floors are subject to expand, due to the wood based HDF core, therefore, keeping a 3/8-inch gap between the floorboard and the wall, makes sense. If you don’t have the actual tools to cut your laminates, then you can take them back to your laminate flooring stockist to cut them for you.

Final Advice
DIY is supposed to be a fun and learning experience, and if you feel at a loss midway, the most cost-effective way to do this would be to consult a professional floor fitter, without making any expensive damages to the purchased boards. So have a backup plan beforehand, in case this is your first venture, or you are not enough confident with the space you are working with.

Author Bio:

If you are looking to DIY your flooring project, then it’s best to have a laminate flooring supplier, that can give you all the resources you need to install your new floors. Laminate Wood Flooring is one of the leading laminate flooring distributors in Ireland that supplies branded products to homeowners as well as other laminate flooring stockists.