Clear Decking Oil – Best Oil For Your Deck Finish

By Author: CTA Products Group
Total Articles: 1

Your wood deck may be beautiful now, but it can deteriorate over time due to exposure to the environment. Being outdoors, it is more susceptible to termites, mold growth, and powder post beetles. Rather than applying conventional pesticides and cleaning frequently, consider applying clear decking oil when finishing the structure. It is among the best decking treatment that will preserve wood by controlling decay-causing organisms on wood. Reputable manufacturers of decking oil have formulated their product to provide unmatched water repellency to prevent moisture build-up, which can make a mold, mildew, and termites.

The best decking treatment is a non-film coating that can work even on pressure treated wood. It is easy and quick to apply, typically with a single coat to get the job done, and it will provide a sheer trans-oxide color. The solution is also known as Q8 log oil and it effectively soaks and penetrates deep into wood, offering protection on the surface and into the cell structure of the material. Treatment on the exterior will not peel or crack, even if it has been years since you applied it.

There are many benefits to using clear decking oil. This best decking treatment controls rotting and stops the formation of fungi. Powder post beetles and termites are not likely to nest or infest your deck because the formulation is toxic to them. It also controls splitting and cracking to prolong the lifespan and quality of your wood deck. Some manufacturers offer it in pre-tinted colors. You can also get it in quarts, which may be suitable for End-Cut treatment to validate the warranty on Thompsonized, Outdoor, and Wolmanized wood products. Non-contact and siding applications may be tinted with universal type pigments and oil dispersible pigments. Just be sure to get in touch with the dealer of the clear decking oil for instructions.

The best decking treatment is not just safe for wood. It is safe for humans, too, as it meets all state, local, and federal VOC restrictions. The application does not require corn-cob removal, and if you need to re-coat, you do not have to do sandblasting or sanding. You may use a low-pressure spray to apply the clear decking oil, and even if you use traditional brushes, it will not leave any mark on the deck.

CTA Products Group specializes in Outlast® wood treatment products for log homes, exterior wood siding, fences, pressure treated lumber and decking. The company offer an EPA registered wood preservative and the only botanical insect repellent additive for exterior coatings. Our product line includes exterior finishes and cleaners, paint and coatings additives interior finishes and cleaners.