How To Maintain The Sports Floor

By Author: wholesale interlocking multi-use basketball court,
Total Articles: 35
Comment this article

First, initial maintenance
1. After 48 hours of construction of the sports floor, thoroughly clean the floor and vacuum it. If it is contaminated, it can be diluted with a neutral detergent and then scrubbed with a rag (contact the manufacturer or us for the dilution amount of the diluent)
2. Remove the surface sewage and clean the sewage with a clean rag before the floor is dry.
3. After the [url=https://www.sc-zsfloor.com/interlocking-multi-use-basketball-court-flooring]wholesale interlocking multi-use basketball court[/url] is dry, use waxing wax to polish, wax water to be evenly applied, and then apply the second time after the first time is completely dry.
Second, daily maintenance
1. Sand and gravel protection: A sandstone protective mat should be placed at the door of the price of the [url=https://www.sc-zsfloor.com/prefabricated-interlocking-indoor-tennis-court]customized synthesis indoor tennis court tiles[/url] and at the entrance of the hall to prevent the shoes from being scratched by bringing the sand into the room;
2. Item handling protection: When carrying articles, especially ...
... when there are sharp metal objects at the bottom, do not drag on the floor to prevent the floor from being injured;
3. Pyrotechnic protection: Although PVC sports flooring is a floor with fire rating of flame retardant (B1), it does not mean that the floor will not be burned by fireworks. Therefore, when using sports flooring, do not burn burning cigarettes, mosquito coils, and electricity. Irons and high-temperature metal objects are placed directly on the floor to prevent floor damage;
4. Regular floor maintenance: PVC sports floor cleaning is cleaned with neutral detergent. Do not use strong acid or alkali cleaner to clean the floor and do regular cleaning and maintenance work;
5. Pollution treatment: Ink, food, greasy, etc. contaminated on the PVC sports floor should be wiped off, and then the traces should be scrubbed with diluted detergent. If the residual black leather shoe print is difficult to remove, you can use the veil to loosen the perfume and scrub. Pour the perfume on the floor and clean it. After scrubbing, it should be replenished with wax;
6. Precautions: Floor cleaning can not be done with clean balls, knives, and dirt that cannot be cleaned by conventional methods. Consult the person concerned, and do not use acetone, toluene, and other chemicals.
7. Chemical protection: avoid a large amount of water staying on the floor surface for a long time, especially the block floor, the homogenous floor, the water soaking the floor for a long time, may penetrate under the floor to make the floor glue dissolve and lose the adhesion, or it may The floor surface of the protective wax moisture layer causes floor pollution, and it is also possible that the sewage penetrates into the floor to cause discoloration of the floor (homogeneous floor);
8. Sun protection: Avoid direct exposure to strong light, do a good job of ultraviolet radiation on the floor to prevent discoloration and fading of the floor.
Third, regular maintenance
The stain on the floor not only pollutes the wax film on the floor surface, but also penetrates into the interior of the floor, making the floor wax turn yellow and affecting the cleanliness of the floor. At this time, the old floor wax should be removed in time to re-wax.
1. Use a dust pusher or vacuum cleaner to clean the [url=https://www.sc-zsfloor.com/prefabricated-interlocking-running-track]prefabricated interlocking running track[/url].
2. Dilute the special wax remover for floor wax with warm water.
3. Apply the diluted wax remover to the surface of the floor and wait for 5-10 minutes to decompose the surface of the floor wax.
4. Use a special cleaning machine with the corresponding type of cleaning disc to perform bottom speed grinding and cleaning.
5. Sample the sewage on the floor, clean the floor with clean water and then re-absorb the sewage.
6. After the floor is dry, use a special wax to evenly apply the special wax for sports flooring.
7. It is recommended to apply 2-3 times or more to a place with a large flow of people. Wait until the previous wax is fully dry before hitting the second one.
8. After the floor is waxed, it should be fully dry before use. Do not step on the floor before air drying.
9. Floor waxing can be waxed and maintained regularly according to different occasions.