Features And Maintenance Of High-efficiency Peanut Picker Machine 8000/6000 Equipment

By Author: yang huimin
Total Articles: 132
Comment this article

High-Efficiency Peanut Picker machine 8000/6000 equipment is a device that many users will use now. How much do you know about the features and technical maintenance of this equipment? Let's analyze it for everyone today.
First, due to the reasonable design of the angle of the plow tip of the harvester, the machine is very light in use. In actual work, a four-wheel tractor with more than 12 horsepower can drive normal work.
Second, due to the reasonable jitter frequency of the shaking axis, the harvester can shake the soil carried by the peanut roots well during work.
Third, due to the reasonable design of the vibrating screen movement angle and transmission mode, the harvester vibrating screen system will not malfunction when used for a long time.
Fourth, due to the reasonable design of the coil and vibrating screen, the working efficiency of the harvester is 3-4 times that of other vibrating screen harvesters. The net rate is 4-5 times that of other chain harvesters.
Fifth, the adaptability is strong, the machine is very adaptable to the soil, the dry land can be collected, the wet land can also ...
... be collected, the sand can be collected, the combined soil can also be collected, and the falling fruit can be installed on the vibrating screen, and the fruit can be removed.
Sixth, the operation is simple, the machine is easy to adjust, only adjust the depth of the line, you can harvest in the right direction, you can also harvest horizontally, the harvest machine will not hang the fruit on both sides.
Seven, technical maintenance and preservation
1. After the end of each shift, the soil of all parts of the machine should be removed.
2, check the fasteners of various parts, if loose and timely tighten
3. Check whether the rotating parts are flexible or not. If it is not normal, it should be adjusted and eliminated in time.
4. When the machine is not used for a long time, it should be taken care of to prevent rain and avoid contact with acidic substances to avoid corrosion. The blade should be oiled!