Olivetti 3d S2 Printer

By Author: Shruthi
Total Articles: 3
Comment this article

The Olivetti 3D S2 is a latest 3D Printer mainly designed for small to medium sized companies engaged in the digital transformation process. It has a large format printing area (400x400x400mm) which increases the possibilities of use of 3D Printer within the company for every need and it prints at very high speed of over 150mm/sec. So, it is considered as the one of the best performing 3D Printers. The output from Olivetti 3D S2 can be printed using PLA & ABS as well as with nylon, rubber and special filaments such as wood, plastic, carbon & marble. It is easily adapted future application because it uses open-source hardware and software components. It can print designs which is downloaded from PC's as well as from SD memory cards.
It has Industrial quality and reliability.
Printing can be done by using various plastic materials which is also filled up with wood, plastic, carbon and marble
Can be print directly from SD Card is done without using PC.
Dual Extruder
For a industrial Development of a business, the 3D Printing & rapid prototyping have become the two necessary activities. ...
... Olivetti 3D S2 prints prefect shape models in short time because it has large format print area and uses various plastic materials. It is a dual extruder which allows more printing speed and reduction of the breaks.
Specifications
• Printing area 400x400x400 mm
• Printing volume: about 64 liters
• Minimum layer thickness: 0.05 mm (50 microns)
• Precision tolerance (net of material retraction)
o X-y axis: 0.08 mm (80 microns)
o Z axis: 0.01 mm (10 microns)
• Maximum extruder temperature: 285 ° C
• Maximum heatbed temperature: 120 ° C
• Filament diameter: 1,75 mm
Genera Characteristics
• Fused Filament Fabrication (FFF)
• Printing area 400x400x400 mm, one of the largest in the category
• Anodized aluminum shell 45x45 mm radiated
• Polycarbonate paneling
• Closed Structure body, with front panel lock
• Dual extruder
• Tempered glass big heatbed
• Direct printing from a SD card without using the PC
• Print speed 150 mm/s
• Minimum layer thickness: 0.05 mm (50 microns)
• Printer nozzles in different diameters: from 0.30 mm to 0.80 mm
• Integrated LCD control panel
LCD Panel Features
• First nozzle temperature
• Second nozzle temperature
• Heatbed temperature
• Cooling fan speed
• Nozzle current position (X, Y, Z)
• Selected Feed Rate
• Print progress from SD card
• Printing time
• The status bar (status messages, and/or error messages)