How To Repair A Fence In A Do-it-yourself Style?

By Author: Ashton Coaldrake
Total Articles: 222
Comment this article

If you are inexperienced in doing it yourself process, this work can be challenging but not impossible to perform. Do it yourself process will save you some bucks and you will also gain knowledge about fencing in your Port Lincoln property. The do it yourself process will help you in replacing rotten panels and also redesign it if required. In the write up you will be knowing about the following things:

How to put a fence yourself
Replacing the existing one with a new design
Treat the timber fence and make it free from pest infestation
Putting up galvanised metal barricades

Be sure that you get the best kind of support as you don't want to mess with the exterior look of the property. It is not about fixing the nails but it should be aesthetically appealing as well. If you cannot do the stuff yourself the mending work can be costly and there is no use of wasting time.



Replacing the old post


When it comes to working on old post one of the basic process includes replacing the old ...
... ones that are rotten. The part of replacing the old post includes digging the earth and extracting the entire picket and installing the new one. With professional help, you get the best outcome but DIY is also not going to be bad when done properly. All you need to do is dig deep with a shovel and clear any dirt from the sides of the picket.



In the next step, you have to remove the rotten post and replace it with a new one. Make sure the post is fixed to the ground before pouring the concrete. The concrete needs 24 hours to settle down and harden only after which it should be used. If you are not ok with removing the earlier one, you can install a new picket on the edge of the old one making it firm in its place.



Treating the wooden posts


At times you need to treat the wooden pickets in order to protect it from water damage and pest infestation. Different kinds of chemical and oils are available that will make sure the posts don't rot over a long period of time. Make sure apart from the wood, the nails and pins are also coated to prevent corrosion that can damage the fencing in your Port Lincoln house.



Galvanized metal fence


If you are thinking of replacing the wooden fence completely, the metal posts can take its place efficiently. Once installed correctly, it can protect your property for a long time without requiring replacing. Keep in mind when working with a galvanized metal fence, make sure the ground condition is good enough and not soggy that will not provide good support to the metal and topple down eventually. Use a heavy gauge cap to protect the post from rain.



These were some of the ways through which you can replace and repair the fence in a do-it-yourself process. As you can see, you need some basic tools and your work will be done within a day or two without requiring professional support.

About the Author: This contribution has been made by Ashton Coaldrake who has written a number of articles on Fencing Port Lincoln and provides fruitful information.