123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Service >> View Article

Safety Tips For Mining Truck Driver

Profile Picture
By Author: Eesha Zaveri
Total Articles: 26
Comment this article
Facebook ShareTwitter ShareGoogle+ ShareTwitter Share

Driving a dump truck in a mine area is often a dangerous and delicate operation. You can experience a number of accidents or other issues, which is why it is important to practice safety while driving a dump truck. Even if you are only going to a short distance. Whether you are new to driving in a mining truck, it is vital to be safe, and following the tips outlined below can help you to have a secure and successful day of driving.
Before you start driving, perform these checks
Before you start driving, it is important to perform the vital checks of your vehicle in which you will drive, such as tyre pressure, water, oil, safety features for any repairs as well as hydraulics and suspension for elevation. This will also ensure that you do not set off on a dump truck that is less than roadworthy, which could result in an accident. You should report of any damaged parts that need repair or replacement and it is wise to wait for the quicker repairs to be completed before using that vehicle. As with any of vehicle, performing these checks also extends the lifespan of the vehicle itself.
Ensure your safety lights and alarms are working
This is the second most important part in ensuring the safety of driving a dump truck. The driver needs to be sure that the backing up alarm and lights are working properly and correctly, without any delays or malfunctions. Along with these safety features, you must be sure that tailgates are fully open and that the area should clear before beginning the unloading process. Using your lights and alarms will allow people enough time to clear your pathway, making for a smooth and successful unloading.
Assess the stability
The most important feature of any dump truck in the mining industry is the stability of any vehicle. When loading and unloading the truck, be sure to assess the level of the ground the truck is on it should be completely flat, without uneven patches that could cause the truck to roll or wet or sludgy spots that could cause the wheels to become stuck. To further ensure the stability of the dump truck when loading or unloading, you could build a barrier around the rear unloading point or edge, or a pile that has an upward angle to support any possibility of rolling back of the vehicle.
Look at the loading procedure
The manner in which you load your dump truck is vital to consider. You should always follow the recommended axle weight so that you don’t overload the vehicle and cause tyre damage. Always try to level the material you load and begin loading in the centre of the loading box. If the material is not free-flowing, you should lessen the amount of material to the top end of the loading box. Ensure that the loading box surface is level and does not have anything in it that can restrict the flow of the material. Using box liners can help with this situation.
Check the grounds before unloading
The stability of the ground, meaning the evenness of the unloading position, should always be assessed before you begin unloading. Be sure to check for uneven patches and for sludgy surfaces. Also, check your mining shovel simulator when beginning the unloading procedure. The grounds where you are unloading should not be cluttered with other workers and vehicles, in order to avoid accidents and hazards when tipping. Be sure to announce that you are going to begin unloading so the area can be cleared of both people and other vehicles.
Slow and steady wins the race
When you are backing up your dump truck, remember to do so at a walking pace. If you speed up, this could cause instability in the vehicle, due to the heavy weight it is carrying and may even cause you to lose control of the vehicle itself. Keeping your pace slow and steady also ensures the safety of the workers and vehicles around you, allowing them ample time to clear the pathway to the unloading point. Always be sure you have someone to guide you in turning and stopping during the reversing of the vehicle, as your excavator training simulator has blind spots that can cause accidents or driving hazards.
Conclusion
Following these safety tips will help with a smoother and safer mining truck driver training. Remember to always check the vehicle first, making sure that all the vital equipment works as it should. Having the correct alarms and lights to warn people is vital, and you should always make certain the surface you are travelling and unloading on is flat. Safety should always come first, no matter your skill level.

Total Views: 41Word Count: 784See All articles From Author

Add Comment

Service Articles

1. How Iso 27001 – Information Security Awareness Training Is Beneficial For Organizations?
Author: Dacey Lyle

2. Best Printing Services Nearby North York Toronto
Author: Catalina

3. Benefits Of Choosing A Good Warehouse Management System
Author: Kumar Ram

4. Online Free Cloud Storage Services In 2020
Author: ifcloud

5. Reset Yahoo Password Using Easy Steps
Author: jack jeorge

6. Usage Of Blueprint Racks Storage
Author: Big blueprint Hanger

7. Save Money On Things To Do In Kendall Fl
Author: Del Solar

8. Seo Service In Sri Ganganagar
Author: yogesh sharma

9. How To Get Rid Of Cockroaches At Home?
Author: Austin Baines

10. We Ensure Your Brand Stays Fresh And Relevant
Author: DesignLab

11. 5 Must-ask Questions For Your Car Detailer
Author: Owenthomson

12. Online Trade Printers
Author: Trade print

13. House Cleaning Tips For A Stress-free Holiday Season In Fort Myers, Fl
Author: DG Cleaning and Carpet Care

14. Voip Softswitch: Crucial Component Of Growing Voip Businesses
Author: Sandip Patel

15. 10 Signs That Indicate Your Sewer Pipe Is Damaged
Author: John Akohion

Login To Account
Login Email:
Password:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: