China Rice And Wheat Soybean Thresher Instructions For Use

By Author: yang huimin
Total Articles: 157
Comment this article

The China Rice and Wheat Soybean Thresher is a new product developed on the basis of the principle of the old generation thresher. It has simple operation, low breaking rate, wide application range and high threshing rate of 99%. It is mainly suitable for wheat, millet, rice, soybean, and sorghum. A multi-purpose machine, and won the national production license and provincial promotion certificate.
The China Rice and Wheat Soybean Thresher is mainly composed of a feeding table, a frame, a concave screen, a detaching drum, a cover, a guide plate, a fan, a vibrating screen, and a transmission device. The breaking rate is low, the removal rate is high, and the loss rate is low, which can be removed once and does not need to be removed. Well received by the majority of users.
China Rice and Wheat Soybean Thresher Instructions for use
1. Before starting the machine, check the bolt fastening condition of each part; if there is any resistance to the roller, confirm that everything is normal and drive for 3-5 minutes.
2. The threshing machine triangle belt should not be too tight or too loose; after starting ...
... the power machine, first, confirm whether the drum steering is consistent with the marking on the machine.
3. After starting the machine, the operator should be more than 2 meters away from the machine. After the machine is running normally, the crop can be fed.
4. The threshing crop should be unbundled, continuously and evenly fed. It should not be too large or too high to prevent the feed inlet from being blocked.
5. Pay attention to the bearing temperature during use, and add lubricant to the bearing at regular intervals.
6. After the drum and fan impeller are damaged, they should be repaired in time. The replacement drum and impeller must be balanced.
https://www.taakthreshermachine.com/rice-and-wheat-corn-threshing-machine/