123ArticleOnline Logo
Welcome to 123ArticleOnline.com!
ALL >> Business >> View Article

What Are The Precautions For Free Sample Cutting Disc?

Profile Picture
By Author: yanghuimin
Total Articles: 204
Comment this article
Facebook ShareTwitter ShareGoogle+ ShareTwitter Share

The free sample cutting disc is a cutting device that many users now choose when they are cutting equipment. What problems should be paid attention to after the purchase and its specific use and precautions? Let me introduce you today.
1. If the blockage is found to be swaying during cutting, the cutting should be stopped immediately. After the block material is fixed firmly, it can continue to work. During the cutting, it is not allowed to move the block material arbitrarily.
When cutting, it is found that the saw blade has obvious deceleration or even the phenomenon of clamping. It may be caused by the belt slipping, loosening of the compression nut or too much depth of the knife, too fast cutting speed, etc., and should be adjusted in time.
3.The line speed should be compatible with the hardness and wear resistance of the processed stone, it is recommended to select the following line speed to cut different types of stone.
Tip: Increase the cutting efficiency when the line speed is not high, which will reduce the life of the saw blade.
4.The use of diamond saw blade technology, feed speed, mainly depends on the performance of the material, for each material when the depth of cut is a certain range of feed speed, if the speed is too high, it will accelerate the wear of diamond Even falling off, causing the saw blade to consume too fast, if the speed is too low, it will make the saw blade self-sharp process not work properly, thus "blunt, slip" loss of cutting ability. Under normal circumstances, the feed speed should be slow when cutting in, and should be uniform when sawing. For common typical materials, when the depth of cut is 20mm, the following feed speed table is recommended for your reference. When the thickness changes, the cutting speed can be Converted by the cutting area (cm2/min).


Total Views: 63Word Count: 313See All articles From Author

Add Comment

Business Articles

1. Specific Classification Of Chemical Products
Author: ada red

2. E-commerce Platforms | Drivers And Limitations | Features | 360quadrants
Author: robert henric

3. Accounting Software | Potential Issues & Features| 360quadrants
Author: robert henric

4. Discover The Many Benefits Of Working In Network Marketing
Author: Martha Smith

5. Why Do Construction Business Prefer 3d Floor Plans?
Author: Komal Trivedi

6. 3pl Warehousing Operations – Benefits And Features To Look For
Author: Dolly

7. Not Sure Which Copywriting Agency To Hire? Here’s What To Look For
Author: Copywriters24

8. Design And Engineering - Centrix Plus
Author: centrix

9. Medical Device Security Market - Growth And Key Industry Players Analysis 2020 And Forecast
Author: robert henric

10. How To Open Demat Account
Author: stock investor kumar

11. The Best Stock Brokers In India
Author: stock investor kumar

12. Top 3 Stocks That Will Give 12-14% Returns In The Short Term
Author: stock investor kumar

13. Forex Trading India
Author: forex, forex trading india

14. Global Milking Robot Market – Industry Analysis And Forecast
Author: shankarmmr

15. India's Most Innovative Interior Design Companies To Watch
Author: insights success

Login To Account
Login Email:
Forgot Password?
New User?
Sign Up Newsletter
Email Address: